|
|
Braided Brake & Clutch Lines
BRAIDED STAINLESS STEEL BRAKE LINES AND MATCHING CLUTCH HOSE KITS Designed to increase braking power and shorten stopping distance giving you a firmer feel when braking and help eliminate brake fade due to hose expansion Custom fit kits are street legal in all states (meet or exceed DOT specification FMVSS106) Great replacements for worn or damaged rubber hydraulic brake and clutch hoses...or replace your original for added performance, handling and take-notice style Feature Teflon+»-+-+ inner hose construction, so they're compatible with all brake and clutch fluids. Hoses are tightly wrapped with great-looking tightly-braided multi-strand stainless steel wire to eliminate hose expansion, which significantly reduces brake or clutch lever travel. Designed to withstand severe operating conditions with a 12,000 psi burst pressure and 3,000 psi working pressure. Kits include one pre-assembled hose and all fittings, hardware and gaskets to bolt directly to your bike plus mounting and bleeding instructions. Limited lifetime warranty. Limited Lifetime Warranty. Braided stainless steel brake and clutch kits are warranted against defect in material and workmanship and becoming unserviceable during normal use for as long as the original purchaser owns and operates the cycle for which it was intended. Defective kits will be repaired or replaced after factory inspection. Cost for removal or installation is not included. Applications:1987-2000 Kawasaki Vulcan VN1500A1-A13; B1-B4 and C3-C4
Brake Caliper Inserts
BRAKE CALIPER INSERTS Chrome-plated insert with raised center Available in 3 sizes For Harley-Davidson models Install easily with self-stick tape. 1-25/32" Diameter: Fits rear Hayes caliper on '87-on Sportster+»-+-+, FXR and Softail+»-+-+ models. 1-15/32" Diameter: Fits front caliper on '84-on Sportster+»-+-+, FX, FXR and Softail+»-+-+ models; rear Girling caliper on '82 to early '87 Sportster+»-+-+, FX, FXR and Softail+»-+-+ models. 1-3/8" Diameter: Fits front dual-disc caliper on '77-83 Sportster+»-+-+; banana caliper on '72-84 Sportster+»-+-+; rear caliper on '77-81 Sportster+»-+-+ models. Applications:1977-1983 Harley-Davidson FX Models Sportster,1972-1984 Harley-Davidson FX Models Sportster,1977-1981 Harley-Davidson FX Models Sportster
Nonasbestos Disc Brake Pad Set
FRONT AND REAR NONASBESTOS DISC BRAKE PAD SETS For motorcycles Low-friction pad materials reduce rotor wear and brake squeal Bonded-on brake materials can't shear or separate from steel backing Pads are certified in compliance with the Vehicle Equipment Safety Commission Regulation V-3 by the American Association of Motor Vehicle Administrators (AAMVA). Sold in sets of 2 pads only (one set will do one rotor/caliper). For cycles with 2 front rotors and calipers, order 2 sets. (A) Front wheels for Yamaha models require 2 different sets (one for the left side, one for the right side). Applications:1987-1988 Kawasaki KX Models KX125,1987-1988 Kawasaki KX Models KX250,1987-1988 Kawasaki KX Models KX500,1987-1998 Kawasaki KL Models KL650
Chrome-plated Brake Reservoir Cover
CHROME-PLATED BRAKE RESERVOIR COVER Show-chromed one-piece steel cover replaces dull black original to cover more of the reservoir and add extra style Cut-out windows allow easy fluid check Custom designed for a custom fit?mounts like original Chrome-plated hardware included. Applications:2001-2003 Honda VTX Models Sub Model: 1800 Standard & Retro
Braided Brake & Clutch Lines
BRAIDED STAINLESS STEEL BRAKE LINES AND MATCHING CLUTCH HOSE KITS Designed to increase braking power and shorten stopping distance giving you a firmer feel when braking and help eliminate brake fade due to hose expansion Custom fit kits are street legal in all states (meet or exceed DOT specification FMVSS106) Great replacements for worn or damaged rubber hydraulic brake and clutch hoses...or replace your original for added performance, handling and take-notice style Feature Teflon+»-+-+ inner hose construction, so they're compatible with all brake and clutch fluids. Hoses are tightly wrapped with great-looking tightly-braided multi-strand stainless steel wire to eliminate hose expansion, which significantly reduces brake or clutch lever travel. Designed to withstand severe operating conditions with a 12,000 psi burst pressure and 3,000 psi working pressure. Kits include one pre-assembled hose and all fittings, hardware and gaskets to bolt directly to your bike plus mounting and bleeding instructions. Limited lifetime warranty. Limited Lifetime Warranty. Braided stainless steel brake and clutch kits are warranted against defect in material and workmanship and becoming unserviceable during normal use for as long as the original purchaser owns and operates the cycle for which it was intended. Defective kits will be repaired or replaced after factory inspection. Cost for removal or installation is not included. Applications:1996-2001 Yamaha Royal Star XVZ1300
Brake Caliper Inserts
BRAKE CALIPER INSERTS Chrome-plated insert with raised center Available in 3 sizes For Harley-Davidson models Install easily with self-stick tape. 1-25/32" Diameter: Fits rear Hayes caliper on '87-on Sportster+»-+-+, FXR and Softail+»-+-+ models. 1-15/32" Diameter: Fits front caliper on '84-on Sportster+»-+-+, FX, FXR and Softail+»-+-+ models; rear Girling caliper on '82 to early '87 Sportster+»-+-+, FX, FXR and Softail+»-+-+ models. 1-3/8" Diameter: Fits front dual-disc caliper on '77-83 Sportster+»-+-+; banana caliper on '72-84 Sportster+»-+-+; rear caliper on '77-81 Sportster+»-+-+ models. Applications:1987 Harley-Davidson FX Models Sportster; FXR and Softrail
Nonasbestos Disc Brake Pad Set
FRONT AND REAR NONASBESTOS DISC BRAKE PAD SETS For motorcycles Low-friction pad materials reduce rotor wear and brake squeal Bonded-on brake materials can't shear or separate from steel backing Pads are certified in compliance with the Vehicle Equipment Safety Commission Regulation V-3 by the American Association of Motor Vehicle Administrators (AAMVA). Sold in sets of 2 pads only (one set will do one rotor/caliper). For cycles with 2 front rotors and calipers, order 2 sets. (A) Front wheels for Yamaha models require 2 different sets (one for the left side, one for the right side). Applications:1977-1978 Suzuki GS Models GS400 (B-C),1979 Suzuki GS Models GS425 (N),1979 Suzuki GS Models GS425E (N),1977-1979 Suzuki GS Models GS750 (B-C-N),1978-1979 Suzuki GS Models GS750E (C-N),1973-1977 Suzuki LeMans GT750 (K-L-M-A-B),1979 Suzuki GS Models GS850 (N)
Braided Brake & Clutch Lines
BRAIDED STAINLESS STEEL BRAKE LINES AND MATCHING CLUTCH HOSE KITS Designed to increase braking power and shorten stopping distance giving you a firmer feel when braking and help eliminate brake fade due to hose expansion Custom fit kits are street legal in all states (meet or exceed DOT specification FMVSS106) Great replacements for worn or damaged rubber hydraulic brake and clutch hoses...or replace your original for added performance, handling and take-notice style Feature Teflon+»-+-+ inner hose construction, so they're compatible with all brake and clutch fluids. Hoses are tightly wrapped with great-looking tightly-braided multi-strand stainless steel wire to eliminate hose expansion, which significantly reduces brake or clutch lever travel. Designed to withstand severe operating conditions with a 12,000 psi burst pressure and 3,000 psi working pressure. Kits include one pre-assembled hose and all fittings, hardware and gaskets to bolt directly to your bike plus mounting and bleeding instructions. Limited lifetime warranty. Limited Lifetime Warranty. Braided stainless steel brake and clutch kits are warranted against defect in material and workmanship and becoming unserviceable during normal use for as long as the original purchaser owns and operates the cycle for which it was intended. Defective kits will be repaired or replaced after factory inspection. Cost for removal or installation is not included. Applications:1996-2001 Yamaha Royal Star XVZ1300
Nonasbestos Disc Brake Pad Set
FRONT AND REAR NONASBESTOS DISC BRAKE PAD SETS For motorcycles Low-friction pad materials reduce rotor wear and brake squeal Bonded-on brake materials can't shear or separate from steel backing Pads are certified in compliance with the Vehicle Equipment Safety Commission Regulation V-3 by the American Association of Motor Vehicle Administrators (AAMVA). Sold in sets of 2 pads only (one set will do one rotor/caliper). For cycles with 2 front rotors and calipers, order 2 sets. (A) Front wheels for Yamaha models require 2 different sets (one for the left side, one for the right side). Applications:1977 Suzuki Titan GT500 (B),1979 Suzuki GS Models GS425L (N),1977-1982 Suzuki GS Models GS550 (B-C-N-T-X-Z),1978-1979 Suzuki GS Models GS550E (C-N),1979 Suzuki GS Models GS550L (N),1979 Suzuki GS Models GSL750L (N),1978-1979 Suzuki GS Models GS1000 (C-N),1978-1979 Suzuki GS Models GS1000E (C-N),1979 Suzuki GS Models GS1000L (N),1979 Suzuki Cafe GS1000S (N)
Braided Brake & Clutch Lines
BRAIDED STAINLESS STEEL BRAKE LINES AND MATCHING CLUTCH HOSE KITS Designed to increase braking power and shorten stopping distance giving you a firmer feel when braking and help eliminate brake fade due to hose expansion Custom fit kits are street legal in all states (meet or exceed DOT specification FMVSS106) Great replacements for worn or damaged rubber hydraulic brake and clutch hoses...or replace your original for added performance, handling and take-notice style Feature Teflon+»-+-+ inner hose construction, so they're compatible with all brake and clutch fluids. Hoses are tightly wrapped with great-looking tightly-braided multi-strand stainless steel wire to eliminate hose expansion, which significantly reduces brake or clutch lever travel. Designed to withstand severe operating conditions with a 12,000 psi burst pressure and 3,000 psi working pressure. Kits include one pre-assembled hose and all fittings, hardware and gaskets to bolt directly to your bike plus mounting and bleeding instructions. Limited lifetime warranty. Limited Lifetime Warranty. Braided stainless steel brake and clutch kits are warranted against defect in material and workmanship and becoming unserviceable during normal use for as long as the original purchaser owns and operates the cycle for which it was intended. Defective kits will be repaired or replaced after factory inspection. Cost for removal or installation is not included. Applications:1995-1999 Honda Shadow Models VT1100C2 "Ace
Brake Caliper Inserts
BRAKE CALIPER INSERTS Chrome-plated insert with raised center Available in 3 sizes For Harley-Davidson models Install easily with self-stick tape. 1-25/32" Diameter: Fits rear Hayes caliper on '87-on Sportster+»-+-+, FXR and Softail+»-+-+ models. 1-15/32" Diameter: Fits front caliper on '84-on Sportster+»-+-+, FX, FXR and Softail+»-+-+ models; rear Girling caliper on '82 to early '87 Sportster+»-+-+, FX, FXR and Softail+»-+-+ models. 1-3/8" Diameter: Fits front dual-disc caliper on '77-83 Sportster+»-+-+; banana caliper on '72-84 Sportster+»-+-+; rear caliper on '77-81 Sportster+»-+-+ models. Applications:1984 Harley-Davidson FX Models Sportster; FX; FXR and Softail,1982-1987 Harley-Davidson FX Models Sportster; FX; FXR and Softail
Nonasbestos Disc Brake Pad Set
FRONT AND REAR NONASBESTOS DISC BRAKE PAD SETS For motorcycles Low-friction pad materials reduce rotor wear and brake squeal Bonded-on brake materials can't shear or separate from steel backing Pads are certified in compliance with the Vehicle Equipment Safety Commission Regulation V-3 by the American Association of Motor Vehicle Administrators (AAMVA). Sold in sets of 2 pads only (one set will do one rotor/caliper). For cycles with 2 front rotors and calipers, order 2 sets. (A) Front wheels for Yamaha models require 2 different sets (one for the left side, one for the right side). Applications:1988-1989 Honda Shadow Models VT600C,1987-1997 Honda Hurricane CBR600,1990 Honda Interceptor VTR250,1991 Honda Shadow Models VT600C
|
|
|
|
|
