Truck/Fuel & Intake Systems/Fuel Injection
Fuel Injectors
FUEL INJECTORS Meet or exceed original-equipment specifications. Improve fuel economy and performance. Eliminate hard starts and stalls caused by a worn or clogged injector. Manufacturer recommends replacing fuel filter (not included) when replacing injectors. MPI=Multi-port Fuel Injection. Note: The VIN number of letter shown in certain GM applications represents the eighth digit of the VIN. (The VIN is located on the driver's side of the dashboard and is read from outside the vehicle by looking in through the windshield.) Applications:1980-1988 Nissan 200SX 3.20L 1952CC-C20E,1980-1983 Nissan 200SX 2.2L 2187CC-Z22E,1984-1987 Nissan Stanza 2.0L 1974CC-CA20E,1984-1987 Nissan 200SX 2.0L 1974CC-CA20E,1988 Nissan 200SX 2.0L 1974CC-CA20E (Models built up to April 1988),1975-1978 Nissan 810 2.4L 2353CC-L24E,1975-1978 Nissan 280Z 2.8L 2753CC-LE,1979-1983 Nissan 280Z 2.8L 2753CC-LE (exc. Turbo),1979-1984 Nissan Maxima 2.4L 2393CC-24E,1979-1984 Nissan 810 2.4L 2393CC-24E,1980-1983 Nissan 200SX 4cyl. 2.0L 1952CC Z20E,1981-1983 Renault 18I 1.6L 1647CC w/L-jetronic injection,1982-1983 Renault Fuego 4cyl 1.6L 1647CC w/L-jetronic injection


GMS Performance Mass Airflow Sensors
PERFORMANCE MASS AIRFLOW SENSOR 10 to 15 horsepower increase at rear wheels! 50-state legal Innovative sensor features a state-of-the-art active-electronic module that provides improved control of both ignition and injector timing, contributing to the big horsepower gain at the rear wheels. 47% more airflow capacity than stock sensors. Sensor is housed in a high-impact injection-molded body to reduce heat "soak, a problem common to stock metal sensor. Installation of this sensor will not affect mileage or drivability under normal conditions. Easy to install in minutes. Instructions included. Applications:1995 Ford Ranger with 4.0L


Helix Power Tower Throttle Body Spacers
POWER TOWER THROTTLE BODY SPACER Dyno tested to produce up to 20 more horsepower! This innovation from Street & Performance Electronics raises throttle body injection unit 1" Added height plus the unique HELIX spiral flow design combine to create an airflow vortex that dramatically improves fuel atomization. The results: more horsepower, greatly increased torque and improved fuel economy. Easy to install. Works with any fuel. HELIX will not affect emissions testing. Applications:1996-2002 Chevrolet S10 Pickup 4.3L,1996-2002 GMC Sonoma 4.3L,1996-2002 GMC S-15 Jimmy 4.3L,1996-2002 Chevrolet S10 Blazer 4.3L


Throttle Body Spacer Kits
THROTTLE BODY SPACER KIT Better fuel economy?tests prove a 10% increase in miles-per-gallon over stock! Dramatic improvement in mid-range power and torque! Easy to install in less than 30 minutes?no drilling or cutting required 6061-T6 billet aluminum. Brackets, gaskets, hardware and instructions included. For carburetor equipped vehicles. See bottom of page. Applications:1998-2000 Ford Ranger 2.5L


Fuel Injectors
FUEL INJECTORS Meet or exceed original-equipment specifications. Improve fuel economy and performance. Eliminate hard starts and stalls caused by a worn or clogged injector. Manufacturer recommends replacing fuel filter (not included) when replacing injectors. MPI=Multi-port Fuel Injection. Note: The VIN number of letter shown in certain GM applications represents the eighth digit of the VIN. (The VIN is located on the driver's side of the dashboard and is read from outside the vehicle by looking in through the windshield.) Applications:1984-1988 Buick Century 3.8L 231; VIN #3 or B (exc. Turbo); MPI,1984-1988 Buick Electra 3.8L 231; VIN #3 or B (exc. Turbo); MPI,1984-1988 Buick LeSabre 3.8L 231; VIN #3 or B (exc. Turbo); MPI,1984-1988 Buick Regal 3.8L 231; VIN #3 or B (exc. Turbo); MPI,1984-1988 Buick Riviera 3.8L 231; VIN #3 or B (exc. Turbo); MPI,1984-1985 Oldsmobile Ciera 3.8L 231; VIN #3; MPI,1984-1985 Oldsmobile Cutlass Ciera 3.8L 231; VIN #3; MPI,1984-1985 Oldsmobile 98 3.8L 231; VIN #3; MPI,1986 Oldsmobile Ciera 3.8L 231; VIN #B; MPI,1986 Oldsmobile Cutlass Ciera 3.8L 231; VIN #B; MPI,1986 Oldsmobile Delta 88 3.8L 231; VIN #B; MPI,1986 Oldsmobile 98 3.8L 231; VIN #B; MPI,1986 Oldsmobile Toronado 3.8L 231; VIN #B; MPI,1987 Oldsmobile Ciera,1988 Oldsmobile Ciera 3.8L 231 (exc. VIN #C),1987 Oldsmobile Cutlass Ciera 3.8L 231; MPI,1987 Oldsmobile 98 3.8L 231; MPI,1987 Oldsmobile Delta 88 3.8L 231; MPI,1987 Oldsmobile Toronado 3.8L 231; MPI,1987 Oldsmobile 98-Regency 3.8L 231; MPI,1987 Oldsmobile Delta 88-Royale 3.8L 231; MPI,1987 Oldsmobile Trofeo 3.8L 231; MPI,1987 Oldsmobile Cutlass 3.8L 231; MPI,1988 Oldsmobile Cutlass Ciera 3.8L 231 (exc. VIN #C),1988 Oldsmobile 98 3.8L 231 (exc. VIN #C),1988 Oldsmobile Delta 88 3.8L 231 (exc. VIN #C),1988 Oldsmobile Toronado 3.8L 231 (exc. VIN #C),1988 Oldsmobile 98-Regency 3.8L 231 (exc. VIN #C),1988 Oldsmobile Delta 88-Royale 3.8L 231 (exc. VIN #C),1988 Oldsmobile Trofeo 3.8L 231 (exc. VIN #C),1988 Oldsmobile Cutlass 3.8L 231 (exc. VIN #C),1987-1988 Pontiac Bonneville 3.8L 231


GMS Performance Mass Airflow Sensors
PERFORMANCE MASS AIRFLOW SENSOR 10 to 15 horsepower increase at rear wheels! 50-state legal Innovative sensor features a state-of-the-art active-electronic module that provides improved control of both ignition and injector timing, contributing to the big horsepower gain at the rear wheels. 47% more airflow capacity than stock sensors. Sensor is housed in a high-impact injection-molded body to reduce heat "soak, a problem common to stock metal sensor. Installation of this sensor will not affect mileage or drivability under normal conditions. Easy to install in minutes. Instructions included. Applications:1997-2003 Ford Ranger with 3.0L


Helix Power Tower Throttle Body Spacers
POWER TOWER THROTTLE BODY SPACER Dyno tested to produce up to 20 more horsepower! This innovation from Street & Performance Electronics raises throttle body injection unit 1" Added height plus the unique HELIX spiral flow design combine to create an airflow vortex that dramatically improves fuel atomization. The results: more horsepower, greatly increased torque and improved fuel economy. Easy to install. Works with any fuel. HELIX will not affect emissions testing. Applications:1996-2000 Chevrolet C/K Pickup 1500/2500 5.0L; 5.7L,1996-2000 GMC C/K Pickup 1500/2500 5.0L; 5.7L Vortec,1996-2000 GMC Jimmy - Full Size 5.0L; 5.7L Vortec,1996-2000 Chevrolet Tahoe 5.0L; 5.7L Vortec,1996-2000 GMC Yukon 5.0L; 5.7L Vortec,1996-2000 Chevrolet Suburban 5.0L; 5.7L Vortec,1996-2000 GMC Suburban 5.0L; 5.7L Vortec


Throttle Body Spacer Kits
THROTTLE BODY SPACER KIT Better fuel economy?tests prove a 10% increase in miles-per-gallon over stock! Dramatic improvement in mid-range power and torque! Easy to install in less than 30 minutes?no drilling or cutting required 6061-T6 billet aluminum. Brackets, gaskets, hardware and instructions included. For carburetor equipped vehicles. See bottom of page. Applications:1994-2000 Dodge Pickup - Full Size Ram 3.9L; 5.2L; 5.9L (exc.with Airaid Intake),2001 Dodge Pickup - Full Size Ram 5.2L; 5.9L


GMS Performance Mass Airflow Sensors
PERFORMANCE MASS AIRFLOW SENSOR 10 to 15 horsepower increase at rear wheels! 50-state legal Innovative sensor features a state-of-the-art active-electronic module that provides improved control of both ignition and injector timing, contributing to the big horsepower gain at the rear wheels. 47% more airflow capacity than stock sensors. Sensor is housed in a high-impact injection-molded body to reduce heat "soak, a problem common to stock metal sensor. Installation of this sensor will not affect mileage or drivability under normal conditions. Easy to install in minutes. Instructions included. Applications:1996 Ford Ranger with 4.0L


Helix Power Tower Throttle Body Spacers
POWER TOWER THROTTLE BODY SPACER Dyno tested to produce up to 20 more horsepower! This innovation from Street & Performance Electronics raises throttle body injection unit 1" Added height plus the unique HELIX spiral flow design combine to create an airflow vortex that dramatically improves fuel atomization. The results: more horsepower, greatly increased torque and improved fuel economy. Easy to install. Works with any fuel. HELIX will not affect emissions testing. Applications:1999-2001 Chevrolet S10 Pickup 2.2L


Replacement Fuel Injector
REPLACEMENT FUEL INJECTOR Restores fuel economy and performance. Eliminates hard starts and stalls caused by worn or clogged injectors. Multi-port injectors replace originals perfectly. Meet or exceed original-equipment specification. Fuel injectors meter and atomize pressurized fuel delivered to the engine. Symptoms of failure include no start, hard start, flooding, hesitation, exhaust odor and poor overall performance. Routine maintenance inspections should be done every 25,000 miles or when driving problems occur. Applications:1976-1980 Volkswagen Dasher (exc. high-altitude) w/1.6L 1588cc,1976-1980 Volkswagen Jetta (exc. high-altitude) w/1.6L 1588cc,1976-1980 Volkswagen Rabbit (exc. high-altitude) w/1.6L 1588cc,1976-1980 Volkswagen Scirocco (exc. high-altitude) w/1.6L 1588cc,1981-1982 Volkswagen Scirocco w/1.7L 1715cc,1982-1983 Volkswagen Quantum w/1.7L 1715cc,1981-1984 Volkswagen Jetta w/1.7L 1715cc,1981-1984 Volkswagen Rabbit w/1.7L 1715cc,1983-1984 Volkswagen Rabbit w/1.8L 1780cc,1983-1984 Volkswagen Quantum w/2.2L 2144cc 5-cyl.


Throttle Body Spacer Kits
THROTTLE BODY SPACER KIT Better fuel economy?tests prove a 10% increase in miles-per-gallon over stock! Dramatic improvement in mid-range power and torque! Easy to install in less than 30 minutes?no drilling or cutting required 6061-T6 billet aluminum. Brackets, gaskets, hardware and instructions included. For carburetor equipped vehicles. See bottom of page. Applications:2000-2001 Dodge Dakota 4.7L,2000-2001 Dodge Durango 4.7L


Fuel Injectors
FUEL INJECTORS Meet or exceed original-equipment specifications. Improve fuel economy and performance. Eliminate hard starts and stalls caused by a worn or clogged injector. Manufacturer recommends replacing fuel filter (not included) when replacing injectors. MPI=Multi-port Fuel Injection. Note: The VIN number of letter shown in certain GM applications represents the eighth digit of the VIN. (The VIN is located on the driver's side of the dashboard and is read from outside the vehicle by looking in through the windshield.) Applications:1987-1990 Ford Mustang 2.3L; MPI,1988-1989 Ford Tempo 2.3L MPI,1990 Ford Tempo 2.3L (exc. California Models); MPI,1991 Ford Escort 1.9L MPI,1986-1988 Ford Taurus 3.0L MPI,1988-1989 Ford Taurus 3.8L MPI,1989-1990 Ford Taurus 3.0L (exc. SHO models); MPI,1988 Ford Thunderbird 3.8L MPI,1989-1990 Ford Thunderbird 3.8L (exc. Supercharged); MPI,1990 Ford Probe 3.0L MPI,1986-1988 Ford Thunderbird 5.0L 302; MPI,1986-1991 Ford Crown Victoria 5.0L 302; MPI,1985-1991 Ford Ranger 2.3L; MPI,1986 Ford Bronco II 2.3L; MPI,1986-1987 Ford Aerostar 2.3L MPI,1986-1991 Ford Aerostar 3.0L MPI,1987-1989 Ford F-Series Pickup 4.9L 300 ALL; MPI,1987-1990 Ford Bronco II 2.9L MPI,1987-1992 Ford Ranger 2.9L MPI,1990 Ford F-Series Pickup 4.9L 300 ALL (exc. E400 Transmission); MPI,1991 Ford F-Series Pickup 4.9L 300 ALL; MPI,1988-1989 Lincoln Continental 3.8L; MPI,1986-1987 Lincoln Continental 5.0L 302; MPI,1986-1990 Lincoln Town Car 5.0L 302; MPI,1988-1989 Mercury Topaz 2.3L; MPI,1991 Mercury Tracer 1.9L; MPI,1986-1990 Mercury Sable 3.0L; MPI,1988 Mercury Cougar 3.8L; MPI,1988-1989 Mercury Sable 3.8L; MPI,1989-1990 Mercury Cougar 3.8L (exc. Supercharged); MPI,1992-1993 Mercury Sable 3.8L; MPI,1986-1988 Mercury Cougar 5.0L 302; MPI,1986-1988 Mercury Grand Marquis 5.0L 302; MPI,1987-1989 Ford Van - Full Size 4.9L 300 ALL; MPI,1990 Ford Van - Full Size 4.9L 300 ALL (exc. E400 Transmission); MPI,1991 Ford Van - Full Size 4.9L 300 ALL; MPI


GMS Performance Mass Airflow Sensors
PERFORMANCE MASS AIRFLOW SENSOR 10 to 15 horsepower increase at rear wheels! 50-state legal Innovative sensor features a state-of-the-art active-electronic module that provides improved control of both ignition and injector timing, contributing to the big horsepower gain at the rear wheels. 47% more airflow capacity than stock sensors. Sensor is housed in a high-impact injection-molded body to reduce heat "soak, a problem common to stock metal sensor. Installation of this sensor will not affect mileage or drivability under normal conditions. Easy to install in minutes. Instructions included. Applications:1992-1994 Ford Ranger with 4.0L


Helix Power Tower Throttle Body Spacers
POWER TOWER THROTTLE BODY SPACER Dyno tested to produce up to 20 more horsepower! This innovation from Street & Performance Electronics raises throttle body injection unit 1" Added height plus the unique HELIX spiral flow design combine to create an airflow vortex that dramatically improves fuel atomization. The results: more horsepower, greatly increased torque and improved fuel economy. Easy to install. Works with any fuel. HELIX will not affect emissions testing. Applications:1994-1995 Chevrolet S10 Pickup 4.3L,1994-1995 Chevrolet S10 Blazer 4.3L,1994-1995 GMC S-15 Pickup 4.3L,1994-1995 GMC S-15 Jimmy 4.3L,1987-1995 Chevrolet C/K Pickup 1500/2500 4.3; 5.0L; 5.7L T.B.I.,1987-1995 GMC C/K Pickup 1500/2500 4.3L; 5.0L; 5.7L TBI,1987-1995 Chevrolet Blazer - Full Size 4.3L; 5.0L; 5.7L,1987-1995 GMC Jimmy - Full Size 4.3L TBI,1987-1995 Chevrolet Tahoe 4.3L; 5.0L; 5.7L,1987-1995 GMC Yukon 4.3L; 5.0L; 5.7L TBI,1987-1995 Chevrolet Suburban 4.3L; 5.0L; 5.7L,1987-1995 GMC Suburban 4.3L TBI


Throttle Body Spacer Kits
THROTTLE BODY SPACER KIT Better fuel economy?tests prove a 10% increase in miles-per-gallon over stock! Dramatic improvement in mid-range power and torque! Easy to install in less than 30 minutes?no drilling or cutting required 6061-T6 billet aluminum. Brackets, gaskets, hardware and instructions included. For carburetor equipped vehicles. See bottom of page. Applications:2002 Dodge Pickup - Full Size Ram 4.7L



Truck Fuel & Intake Systems Fuel Injection
Automotive
ATV
Car
Clearance
Jeep
Motorcycle
RV
Sport Compact
Sport Truck
SUV
Truck
Van
©2003 AutoJolt.com All rights reserved
Truck Fuel & Intake Systems Fuel Injection