Truck/Suspension/ Shocks & Steering/Lift & Lowering Kits

Body Lift Kits BODY LIFT KITS FOR 2WD AND 4WD TRUCKS Raise your truck a full 2" or 3" Designed and tested to withstand the toughest off-road punishment Give your truck that "off-road look" and ability Provide the extra clearance you need for travel over rough, rocky terrain? allow use of big tires or wheels without fender well modifications. Large graphite and glass-impregnated nylon body blocks provide maximum support with minimum weight increase. All necessary blocks, bolts, spacers, adapters and instructions included. Front Bumper Raising Kit available for '88-94 Chevy/GMC standard and extended cab 1/2- and 3/4-ton pickups, and '92-94 Tahoe, Yukon and Suburban. Eliminates the gap between the body and the top of the bumper when a body lift kit is installed. Includes all the hardware necessary to raise the bumper. 2" or 3" kit available. NOTE: Installation requires 2 people and approx. 1/2 day. Product SKU numbers ending in "F" are shipped separately from the factory. (A) Front bumper brackets included. (B) Front and rear bumper brackets included. (C) Require front bumper raising kit (not shown) sold separately below. Applications:1994-1996 Dodge Pickup - Full Size Ram 1500 and 2500 (exc. Diesel) Belltech Rear Shackle/Hanger Kits REAR HANGER AND SHACKLE KIT Save 20% on Selected Items! Lowers rear of truck 4" while maintaining original ride quality Durable powder-coat finish Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1997-2001 Ford F-Series Pickup F150/F250 (exc. Super Duty) Belltech Rear Flip Kit REAR FLIP KIT Save 20% on Selected Items! Relocate the rear axle on top of the rear leaf spring pack for lowest drop possible! Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Includes contoured, heavy-duty C-sections, heliarc-welded saddles, spring plates and shock extension with tough powder-coat finish, 5/8" U-bolts, top-grade hardware and instructions. For the ultimate drop, use with front spindles and springs (both sold separately). Flip kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1973-1987 Chevrolet C/K Pickup C10 with 1-1/4" rotor (will not fit 1" thick brake rotor),1973-1987 GMC C/K Pickup C10 with 1-1/4" rotor (will not fit 1" thick brake rotor) Suspension Lift Kit SUSPENSION LIFT KIT For 4WD Toyota pickups and Landcruisers Provides extra lift along with great handling! Adds needed clearance for bigger wheels and tires and safe off-roading without sacrificing riding comfort and control Precision built kit includes everything needed to complete the lift and perform year after year. Kit includes 4 Explorer shocks (except Tacoma, which retains use of factory front shocks). Pickup kit has necessary brackets and hardware to lift truck while maintaining factory steering geometry and ride quality. Landcruiser kit has 4 leaf springs and hardware. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. For '86-95 Toyota pickups: Stage 2 kit includes performance lateral compression struts and spindle spacers. Applications:1996-2000 Toyota Tacoma Tuff Country Leveling Kits LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! Uses 1/4" steel upper coil spring spacer?factory ride is retained. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Dodge Pickup - Full Size Ram 1500; 2500 & 3500 Tuff Country Leveling Kits Promo LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! Uses 1/4" steel upper coil spring spacer?factory ride is retained. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Toyota Tundra Wheel Drive: 4WD Tuff Country Leveling Kits Promo Gloves 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Engine Type: Gas Engine; Sub Model: Super-duty F250; F350; Wheel Drive: 4WD Body Lift Kits BODY LIFT KITS FOR 2WD AND 4WD TRUCKS Raise your truck a full 2" or 3" Designed and tested to withstand the toughest off-road punishment Give your truck that "off-road look" and ability Provide the extra clearance you need for travel over rough, rocky terrain? allow use of big tires or wheels without fender well modifications. Large graphite and glass-impregnated nylon body blocks provide maximum support with minimum weight increase. All necessary blocks, bolts, spacers, adapters and instructions included. Front Bumper Raising Kit available for '88-94 Chevy/GMC standard and extended cab 1/2- and 3/4-ton pickups, and '92-94 Tahoe, Yukon and Suburban. Eliminates the gap between the body and the top of the bumper when a body lift kit is installed. Includes all the hardware necessary to raise the bumper. 2" or 3" kit available. NOTE: Installation requires 2 people and approx. 1/2 day. Product SKU numbers ending in "F" are shipped separately from the factory. (A) Front bumper brackets included. (B) Front and rear bumper brackets included. (C) Require front bumper raising kit (not shown) sold separately below. Applications:1999-2000 GMC Sierra 1/2-ton (exc. Diesel),1999-2000 Chevrolet Silverado 1/2-ton (exc. Diesel) 2" Add-A-Leaf Kit 2" ADD-A-LEAF KIT Recommended for use with a snow plow Adds overall 1-1/2" to 2" lift?exact lift will vary, depending on engine size and accessories. Kit includes 2 leaf springs for front or rear and center bolts. (Can also use lift kit on rear.) Add-a-leafs not intended for use with other devices to lift vehicles. Note: Longer shocks recommended, but not required. Applications:1986-1996 Jeep Wrangler 3" Lift Kit for 2WD Pickup 3" LIFT KIT For American 2WD pickups Adds a 4WD look to your 2WD! Gives your pickup a more aggressive stance Designed and manufactured by Explorer to ensure proper handling and extended service life. Provides room for larger tires and wheels. Improves vision in traffic or off-road. Adds more ground clearance?a must on trails or fields. Designed and manufactured to ensure proper handling and extended service life. Kit includes 3" lift heavy-duty front spindles and front and rear ES1000 performance shock absorbers. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes rear add-a-leaf springs. (B) Includes rear lift blocks and U-bolts. Applications: All Makes All Models Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Dodge Pickup - Full Size Ram 1500 4WD (exc. Factory Off-road Package) Active Suspension Kit ACTIVE SUSPENSION KIT Dramatically improves stability?adds up to one ton of load capacity! Minimizes wear on tires, shocks and leaf springs 2 variable-rate coils designed to automatically aid rear leaf springs come into operation when needed?the more strain on leaf spring, the more Roadmaster aids suspension. Stops sway and reduces body roll on corners. Lifting force is applied to the side, countering the downward force during body roll. Helps keep truck closer to level in a turns. Easy bolt-on installation. Note: Do not exceed gross vehicle rating of truck. Cannot be used on vehicles with factory overload springs. Applications:1983-1999 Ford Ranger Air Lift EasyStreet Badboy Solenoid Valve BADBOY++-+-+ SOLENOID VALVE Brass body and 3/8" NPT ports 0.390" orifice Cv=2.75 Applications: All Makes All Models Air Lift EasyStreet Big-Port 1/2" NPT Bags BIG-PORT 1/2" NPT BAG Save 20% ! Designed for unrestricted airflow All-aluminum end plates Bellows include top and bottom roll plates Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models (Replaces Firestone 255C) Air Management Systems FULL AIR CONVERSION SPORT SUSPENSION SYSTEM KITS Save 20%! Maintains integrity of hydro-formed frame Easy bolt-on design?no welding and minimal cutting Extended-length panhard rod keeps rear axle centered at all times From an industry leader, these systems are engineered to provide the maximum amount of lowering while retaining the integrity of the suspension. You'll have a sensational slammed look for show yet still be able to raise your truck to a safe, comfortable ride height for driving. Rear air springs are mounted outside frame for maximum lowering. Front kit includes air springs, brackets, shocks, shock-relocation brackets, hardware, air line and fittings. Rear kit includes air springs, upper and lower brackets, control arms, panhard rod, hardware, air lines and fittings. Compressors sold separately. Manufacturer's limited one-year warranty. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models Belltech Complete Lowering Kits COMPLETE LOWERING KITS For Chevy/GMC, Dodge and Ford trucks and SUVs Everything you need in one handy package to lower your truck the right way Only the finest quality components?specifically designed for a great fit and long life Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Coil Spring Kit Contents: A=Front coils, rear hanger/shackle kit, front and rear shocks B=Front coils, rear hanger/shackle kit, front and rear shocks, driveline alignment kit C=Front coils, rear blocks, U-bolts, front and rear shocks D=Front and rear coil springs, shocks and rear-limiting straps E=Front coil springs, rear air back bracket, front and rear shocks, rear-limiting straps Applications:1994-2000 Chevrolet S10 Pickup Extended Cab inc. Extreme,1994-2000 GMC S-15 Pickup Extended Cab inc. Extreme Complete Suspension Lift Kits COMPLETE SUSPENSION LIFT KITS Great off-road look 2-1/2, 3" and 5" lifts available For '94-98 Dodge Ram pickups Improve suspension performance while making room for larger tires and wheels. Premium steel and precision forging/die-cutting/forming designed by SuperLift++-+-+ top engineers ensure uniform parts for a hassle-free fit! Include 4 Superide shocks with yellow boots. Hardware kit for Cummins diesels sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: Dodge Pickup - Full Size Daystar Front Lift Kit FRONT LIFT/LEVELING KIT Maintains stock ride quality while giving your truck a balanced look! Eliminates droop or "dive" of factory suspension Here's the easy way to level the front of your truck! Long-lasting Dura-Thane? coil spring spacers mount above coil springs. Kit raises right and left sides. Applications:2004 Ford F-Series Pickup Sub Model: F150,2003-2004 Ford Expedition Fabtech Complete 2WD Lift Kits COMPLETE 2WD LIFT KIT Lift your truck up to 4" for the look and feel of a 4WD vehicle Complete kit includes front coil springs; upper control arms; rear lift blocks and U-bolts or add-a-leaf springs; adjustable front shocks; performance rear shocks; hardware; instructions. Shocks come with a limited lifetime warranty. Shocks feature hydraulic foam cell construction; chrome-plated 9/16" diameter hardened rod; polyurethane bushings; massive 1-3/8" diameter piston; high-flow 9-stage valving. Front shocks also have 3-way adjustability for "customized" settings. Bolt-on installation. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes ball joints with the control arms. Applications:1998-1999 Ford Ranger with Preinstalled Ball Joints Ground Force Complete Lowering Kits COMPLETE LOWERING KIT Save 20% on Selected Items! One easy-to-afford kit lets you hit the ground running with a sleeker look and hotter handling! Top-quality, fully ISO 9000 certified system includes everything you need to lower your truck Every component is precision matched to achieve that customized effect When lowering your truck, you can take chances or you can get Ground Force++-+-+ and know the components you receive will be the finest available. Casting, shock absorbers, coil springs and leaf springs are manufactured within fully ISO 9000 certified quality systems. C-section frame inserts are made of the same metals used in the original factory truck frame to ensure compatibility. The specially-tuned high-pressure nitrogen-gas-charged shocks are designed for top performance and positive suspension control. Front coils retain a factory-like ride. Ductile iron blocks and U-bolts lower rear and correct driveline angle. All steel components are powder coated for corrosion resistance and show-truck appearance. Manufacturer's limited lifetime warranty. C=coils; B-blocks and U-bolts; S=spindles; SH=shackles and hangers. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2001 GMC Sierra 1500; 2500 (exc. HD or with 2pc. drive shaft) Ext. Cab; Short Bed; Front Drop: 2" C; Rear Drop: 2"SH,1999-2001 Chevrolet C/K Pickup Silverado 1500; 2500 (exc. HD or with 2pc. drive shaft) Ext. Cab; Short Bed; Front Drop: 2" C; Rear Drop: 2"SH Lowering Shackles LOWERING SHACKLES Level trucks without sacrificing ride quality! Lower rear approximately 2-1/4" Heavy-duty 1/4" thick steel shackles are 3" longer than originals. Relocate rear leaf spring and reduce difference between lower front end and higher rear end or close gap between fender well and tire. Use with front lowering springs to lower entire truck. Polyurethane bushings and instructions included. Sold in pairs. Applications:1973-1998 Chevrolet C/K Pickup 1/2-; 3/4- & 1-ton,1973-1998 Chevrolet Blazer - Full Size,1973-1998 GMC C/K Pickup 1/2-; 3/4- & 1-ton,1973-1998 Chevrolet Suburban,1973-1998 GMC Suburban,1973-1998 Chevrolet Tahoe,1973-1998 GMC Yukon Explorer Pro Comp 2WD 3" Lift Kits 2WD 3" LIFT SPINDLE SUSPENSION SYSTEM KIT Dramatically improves your ride and handling...on the highway and off-road Kit includes spindles, 1.5" add-a-leaf and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-1999 Dodge Pickup - Full Size Ram 1500 Pro Comp 2WD Lift Kit for Ford 2WD LIFT SUSPENSION SYSTEM KIT FOR FORD Now is the time to dramatically improve the ride and handling on your truck! Kit includes coils, box kit, rear block kit, Pitman arm, 4 ES 3000 shocks and brake lines (lines not required on 4" kit). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1989-1996 Ford Ranger Pro-Comp 6" Pro-Ride Lift System 2WD 6" LIFT PRO RIDE SUSPENSION SYSTEM KIT For a great off-road look, improved suspension performance and to make room for larger tires and wheels Kit includes upper A-arms, spindles, coils, brake lines, 1.5" add-a-leaf, 2.5" rear block kit and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1997-2001 Ford F-Series Pickup F150 Standard Cab Rough Country Lift Block Kits REAR AXLE LIFT BLOCK KIT Raises the rear of your truck allowing additional clearance for bigger tires/wheels or during off-road excursions For use when leaf springs are mounted above axle Strong cast-iron blocks raise truck's chassis and body Kit includes 2 blocks, 4 ultra-strong C1541 steel U-bolts and hardware. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1983-1990 Ford Bronco II 4WD,1983-1997 Ford Ranger Rough Country Suspension Lift Kit SUSPENSION LIFT KITS Allow more wheel travel and space for larger tires Raise vehicle's height up to 4" for increased ground clearance, better protection and control off-road as well as more comfort on the highway Stand up to conditions that cause stock suspensions to fail. Include everything needed to complete the lift, except shocks. Major heavy-duty components in each kit vary by application. Complete new and improved suspension package with Heckethorn shocks and steering stabilizers (all sold separately), designed to enhance the performance characteristics of these Rough Country++-+-+ suspension kits. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1984-1997 Jeep Cherokee XJ 4WD,1984-1997 Jeep Comanche 4WD Rough Country Suspension Lift Kits With Shocks SUSPENSION LIFT KITS WITH SHOCKS Raise pickup for increased ground clearance on larger tires For '70-98 American 4WD pickups All heavy-duty components made by Rough Country++-+-+ (acknowledged manufacturer of the best suspensions) to survive years of hard usage. Include radial-tuned velocity-sensitive valving and huge capacity and oversized construction, Hydro 8000 shocks stand up to all terrain and driving demands without sacrificing ride quality. Urethane bushings extend shock life. Kits include 4 shocks with black dust boots. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1970-1993 Dodge Pickup - Full Size 4" lift 3/4-ton 4WD,1970-1993 Dodge Pickup - Full Size 4" lift 3/4-ton 4WD Stage 2 Suspension 4" Lift Kit STAGE 2 SUSPENSION 4" LIFT KIT Lifts front 4, rear 2-1/2" Front leaf spring, front shock kit and shock boots sold separately For Ford full-size pickups Complete system lets you install up to 35" x 12.5" x 16.5" tires on 16.5" x 9.75" wheels without impairing factory ride or payload capacity. Engineered and built to handle the punishment the Super Duty was meant to take. All items shipped in separate cartons from factory. Cannot be shipped express. NOTE: To achieve the lift desired, you must order one lift kit and 2 front springs (sold separately). Applications: All Makes All Models Superlift Suspension Lift Kits SUSPENSION LIFT KIT Improves suspension performance, provides a great off-road look and makes room for larger tires and wheels Available with or without 4 Superide shocks with yellow boots For '73-97 Chevy/GMC pickups Premium steel and precision forging, die-cutting and forming ensure uniform parts for a hassle-free fit! '73-87 kits have Superide front springs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup K20; K2500; 4" Lift; without Shocks,1973-1991 Chevrolet Suburban 3/4-ton 4wd.; 4" Lift; without Shocks,1973-1987 GMC C/K Pickup K20; K2500; 4" Lift; without Shocks,1973-1991 GMC Suburban 3/4-ton 4wd.; 4" Lift; without Shocks Suspension Lift Kit SUSPENSION LIFT KIT For 4WD Toyota pickups and Landcruisers Provides extra lift along with great handling! Adds needed clearance for bigger wheels and tires and safe off-roading without sacrificing riding comfort and control Precision built kit includes everything needed to complete the lift and perform year after year. Kit includes 4 Explorer shocks (except Tacoma, which retains use of factory front shocks). Pickup kit has necessary brackets and hardware to lift truck while maintaining factory steering geometry and ride quality. Landcruiser kit has 4 leaf springs and hardware. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. For '86-95 Toyota pickups: Stage 2 kit includes performance lateral compression struts and spindle spacers. Applications: All Makes All Models Tuff Country Leveling Kits 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Super-duty F250 & F350 with Gas Engine Tuff Country Suspension Lift Kits SUSPENSION LIFT KIT Get that rugged off-road look?lifts your truck up to 6" Gives added tire clearance for larger tires plus sure-footed performance Handles rough off-road conditions while maintaining a comfortable ride Performance kits include extended radius arms. Shocks sold separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1981-1996 Ford F-Series Pickup F150,1981-1996 Ford Bronco - Full Size Western Chassis Suspension Drop Kits SUSPENSION DROP KIT Every component is quality manufactured for safety and durability to ensure top performance The best way to drop your 2WD truck! Innovative Smooth Rider coil springs (where applicable) are specifically engineered for each individual application. Drop spindles (where applicable) are CNC machined of high-strength ductile iron. Kit with rear blocks have pinion angle correction to ensure less strain on driveline. Easy installation. Manufacturer's limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Kit Contents A: Front drop coil B: Rear pinion angle drop block kit C: Front drop spindle D: Rear drop leaf spring E: A-arm F: Rear drop coil G: Rear drop shackle and hanger kit H: Rear drop flip kit only J: "C" section kit K: Bump stops L: Carrier-bearing bracket Applications:1982-2001 Chevrolet S10 Pickup Standard Cab V6,1982-2001 GMC S-15 Pickup Standard Cab V6 Belltech Front Spindles FRONT SPINDLES Save 20%! Lower front of 2WD pickup 2" Improve handling while maintaining factory-ride quality and steering geometry Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers award-winning dropped spindles as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Spindles maintain critical suspension geometry, eliminating excessive ball joint, shock and tire wear common to other lowering methods. Ultra-strong ductile iron. Sold in pairs. Spindles will not fit all-wheel-drive vehicles. (A) '88-89 C1500 Pickup Standard Cab requires alignment kit 47ZX4046U. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1973-1987 Chevrolet C/K Pickup C10 Pickup w/1-1/4" rotor,1973-1987 GMC C/K Pickup C10 Pickup w/1-1/4" rotor Belltech Front Coil Springs FRONT COIL SPRINGS Save 20% On Selected Items! Lower 2WD pickups 1" to 3" Work with or without dropped front spindles Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers chromium alloy steel coil springs as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Springs are wound, shot peened and powder coated to exact specifications to ensure proper ride height, ride quality and long life. Sold in pairs. Springs will not fit all-wheel-drive vehicles. (A) '97-01 Ford F150 and F250: Alignment kit 47ZX4062A recommended for 3" front, 4" rear drop. (B) '89-97 Ford Ranger: Alignment kit 47ZX4063R recommended. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2001 Chevrolet C/K Pickup C1500 Standard Cab; Short Bed,1999-2001 GMC C/K Pickup C1500 Standard Cab; Short Bed Belltech Rear Lowering Block Kit REAR LOWERING BLOCK KIT Made of high-quality extruded aluminum Lower the rear of your truck in either 1, 2" or 3" increments Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers this kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit includes 1/2" diameter cold-rolled U-bolts, SAE-plated washers and self-locking Nyloc? nuts. Lowering kit will not fit all-wheel-drive vehicles. Applications:1982-2001 GMC S-15 Pickup Extended Cab (exc. '96-01 V6),1982-2001 Chevrolet S10 Pickup Extended Cab (exc. '96-01 V6),1982-2001 GMC Sonoma Extended Cab (exc. '96-01 V6) Belltech Rear Shackle/Hanger Kits REAR HANGER AND SHACKLE KIT Save 20% on Selected Items! Lowers rear of truck 4" while maintaining original ride quality Durable powder-coat finish Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1973-1987 Chevrolet C/K Pickup C10,1973-1987 GMC C/K Pickup C10 Belltech Front Drop I-Beams FRONT DROP I-BEAMS Top-quality heavy-duty construction throughout Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers I-beams as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Meet or exceed original-equipment specifications. Precision welding plus rugged cast ends and urethane bushings ensure years of reliable service. Sold in pairs. I-beams will not fit all-wheel-drive vehicles. Applications:1987-1996 Ford F-Series Pickup F150 (exc. diesel) Tuff Country Alignment Brackets ALIGNMENT BRACKETS Trouble aligning your lifted truck? These brackets are the perfect solution! Restore your 1.5" to 2.5" lifted truck to the proper geometry by dropping the passenger's and driver's side axles Camber-adjustment bolts to ensure precise alignment included Sold in pairs. Applications:1980-1996 Ford F-Series Pickup F250 Superlift 4" Lift Kit 4" LIFT KIT Retains factory ride quality, and steering geometry and CV axle angles Includes new rear springs Especially for 4WDs! New nodular iron spindles incorporate a raised ball joint boss to eliminate need to replace upper control arm. Front anti-sway bar links are extra long to maintain factory bar geometry. Full-width differential/control arm cross members for lateral rigidity. With front and rear Superide shocks with yellow boots. Front drive shaft (SKU# 48ZX8522RF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-2001 Ford Ranger 4WD,1996-2001 Ford Explorer 4WD,2001 Ford Explorer Sport Trac 4WD Tuff Country Suspension Lift Kit SUSPENSION LIFT KIT Essential when you want to raise your truck, but don't want to sacrifice riding comfort Includes front EZ-Ride leaf springs with urethane bushings, front U-bolts, front spring eye bolts, rear blocks with U-bolts and brake line relocating brackets Recommended fro small-block engines only 6" lift kit also includes front sway bar drop bracket and transfer case drop kit. Shocks not included. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup 3/4-ton 4WD,1973-1987 GMC C/K Pickup 3/4-ton 4WD Superlift 4"/3" Lift Kit 4"/3" LIFT KIT Retains factory ride quality, steering geometry and CV axle angles Increases wheel travel Kit includes: new nodular iron spindles (better than ball joint spacers); full-width differential/control arm cross members (for lateral rigidity); front and rear Superide shocks with yellow boots; 3" rear blocks. Front drive shaft (SKU# 48ZX7482XF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-2001 Ford Ranger 4WD Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Dodge Pickup - Full Size Ram 1500 4WD (exc. Factory Off-road Package),1994-2001 Dodge Pickup - Full Size Ram 1500 4WD (exc. Factory Off-road Package) Superlift 6" Lift Kit 6" LIFT KIT Maintains factory ride quality and keeps steering and CV operating angles within factory limits Front suspension, steering and differential are all dropped 6"! Retains all factory steering linkage Center-link stabilizing link ensures more responsive steering and longer Pitman/idler arm life. Allows use of most 35" tires. Front lift can be raised from 6" to 7.5" by adjusting torsion bar. For easier steering, stabilizer is recommended for 3/4- and 1-ton trucks (sold separately; SKU# 48ZX7493UF). Kit includes front and rear shocks (2 shocks for each front wheel on 1/2 ton). Optional front drive shaft (sold separately; SKU# 48ZX7492WF) required for trucks with Autotrac front drive and recommended for 3/4- and 1-ton trucks with part-time transfer case operating over 25 MPH in four-wheel-drive. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2001 Chevrolet Silverado K1500-K3500,1999-2001 GMC Sierra K1500-K3500 Tuff Country IFS Lift Suspension System IFS LIFT SUSPENSION SYSTEM Installing an IFS lift system on a Chevy/GM truck has always been a really tough job?until now! System uses a combination of new spindles and a one-piece sub-frame to reduce the number of brackets required, simplifying installation procedures and drastically cutting installation time! Kit includes all components required for lift, excluding shocks Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Click on SKU# for additional product information. Applications:2000-2003 Chevrolet Suburban K1500 4WD,2001-2003 Chevrolet Avalanche K1500 4WD,2000-2003 Chevrolet Tahoe 4WD,2000-2003 GMC Suburban K1500 4WD Truspeed Custom-Fit Speed Sensor Calibrator TRUSPEED CUSTOM-FIT SPEED SENSOR CALIBRATOR Easily adjusts your speedometer/odometer after installing larger or smaller tires on your computer-controlled truck! Installs in-line with the sensor and recalibrates signal sent to the computer Corrects speed signal for engine, powertrain and ABS controls 2 settings for seasonal tire changes. Precise speed-signal calibration to within 1%. Easy to recalibrate for future tire and/or gear changes. Speedometer reading, ABS functions and transmission shift points are corrected for non-stock tire size. 4-wire installation. Applications:1998-2000 Dodge Durango,1992-2001 Dodge Pickup - Full Size Ram; 1500-3500,1992-2000 Dodge Dakota,1992-1993 Dodge Ramcharger,1994-1996 Ford Bronco - Full Size with 4-wheel ABS only,1998-2000 Ford Explorer,1999-2000 Ford Explorer Sport Trac,1998-2000 Ford Ranger,1992-2000 Jeep Cherokee XJ,1992-2002 Jeep Comanche MJ,1993-2000 Jeep Grand Cherokee ZJ,1992-2001 Jeep Wrangler YJ and TJ,1998-2000 Mercury Mountaineer Tuff Country Leveling Kits Promo 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Engine Type: Gas Engine; Sub Model: Super-duty F250; F350; Wheel Drive: 4WD Body Lift Kits BODY LIFT KITS FOR 2WD AND 4WD TRUCKS Raise your truck a full 2" or 3" Designed and tested to withstand the toughest off-road punishment Give your truck that "off-road look" and ability Provide the extra clearance you need for travel over rough, rocky terrain? allow use of big tires or wheels without fender well modifications. Large graphite and glass-impregnated nylon body blocks provide maximum support with minimum weight increase. All necessary blocks, bolts, spacers, adapters and instructions included. Front Bumper Raising Kit available for '88-94 Chevy/GMC standard and extended cab 1/2- and 3/4-ton pickups, and '92-94 Tahoe, Yukon and Suburban. Eliminates the gap between the body and the top of the bumper when a body lift kit is installed. Includes all the hardware necessary to raise the bumper. 2" or 3" kit available. NOTE: Installation requires 2 people and approx. 1/2 day. Product SKU numbers ending in "F" are shipped separately from the factory. (A) Front bumper brackets included. (B) Front and rear bumper brackets included. (C) Require front bumper raising kit (not shown) sold separately below. Applications:1992-1994 Chevrolet Suburban,1992-1994 GMC Suburban 2" Add-A-Leaf Kit 2" ADD-A-LEAF KIT Recommended for use with a snow plow Adds overall 1-1/2" to 2" lift?exact lift will vary, depending on engine size and accessories. Kit includes 2 leaf springs for front or rear and center bolts. (Can also use lift kit on rear.) Add-a-leafs not intended for use with other devices to lift vehicles. Note: Longer shocks recommended, but not required. Applications:1961-1993 Dodge Pickup - Full Size 1/2- & 3/4-ton,1963-1987 Chevrolet C/K Pickup 4WD,1968-1991 Chevrolet Blazer - Full Size,1968-1991 GMC Jimmy - Full Size,1968-1991 Chevrolet Suburban,1961-1993 Dodge Ramcharger,1961-1993 Plymouth Trailduster,1963-1991 Jeep Cherokee,1963-1991 Jeep Wagoneer,1963-1988 Jeep Gladiator,1963-1988 Jeep J Series Pickup J10 & J20,1963-1987 GMC C/K Pickup 4WD,1968-1991 GMC Suburban 3" Lift Kit for 2WD Pickup 3" LIFT KIT For American 2WD pickups Adds a 4WD look to your 2WD! Gives your pickup a more aggressive stance Designed and manufactured by Explorer to ensure proper handling and extended service life. Provides room for larger tires and wheels. Improves vision in traffic or off-road. Adds more ground clearance?a must on trails or fields. Designed and manufactured to ensure proper handling and extended service life. Kit includes 3" lift heavy-duty front spindles and front and rear ES1000 performance shock absorbers. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes rear add-a-leaf springs. (B) Includes rear lift blocks and U-bolts. Applications:1997-2000 Ford F-Series Pickup 3" Lift Kit Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Dodge Pickup - Full Size Ram 1500 4WD (exc. Factory Off-road Package) Air Lift Air Commander Engine Drive Compressor AIR COMMANDER++-+-+ ENGINE DRIVE COMPRESSOR Fits Chevy small blocks with serpentine belt 100% duty cycle, 2.5 CFM at idle Includes compressor, clutch, belt, pressure switch, relief valve, filter, tank, plumbing and electrical lines, fittings, mounting brackets and instructions. Applications: All Makes All Models Air Lift EasyStreet Big-Port 1/2" NPT Bags BIG-PORT 1/2" NPT BAG Save 20% ! Designed for unrestricted airflow All-aluminum end plates Bellows include top and bottom roll plates Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models Air Management Systems FULL AIR CONVERSION SPORT SUSPENSION SYSTEM KITS Save 20%! Maintains integrity of hydro-formed frame Easy bolt-on design?no welding and minimal cutting Extended-length panhard rod keeps rear axle centered at all times From an industry leader, these systems are engineered to provide the maximum amount of lowering while retaining the integrity of the suspension. You'll have a sensational slammed look for show yet still be able to raise your truck to a safe, comfortable ride height for driving. Rear air springs are mounted outside frame for maximum lowering. Front kit includes air springs, brackets, shocks, shock-relocation brackets, hardware, air line and fittings. Rear kit includes air springs, upper and lower brackets, control arms, panhard rod, hardware, air lines and fittings. Compressors sold separately. Manufacturer's limited one-year warranty. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models Belltech Complete Lowering Kits COMPLETE LOWERING KITS For Chevy/GMC, Dodge and Ford trucks and SUVs Everything you need in one handy package to lower your truck the right way Only the finest quality components?specifically designed for a great fit and long life Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Coil Spring Kit Contents: A=Front coils, rear hanger/shackle kit, front and rear shocks B=Front coils, rear hanger/shackle kit, front and rear shocks, driveline alignment kit C=Front coils, rear blocks, U-bolts, front and rear shocks D=Front and rear coil springs, shocks and rear-limiting straps E=Front coil springs, rear air back bracket, front and rear shocks, rear-limiting straps Applications:1982-2000 Chevrolet S10 Pickup Standard Cab inc. Extreme,1982-2000 GMC S-15 Pickup Standard Cab inc. Extreme Complete Suspension Lift Kits COMPLETE SUSPENSION LIFT KITS Great off-road look 2-1/2, 3" and 5" lifts available For '94-98 Dodge Ram pickups Improve suspension performance while making room for larger tires and wheels. Premium steel and precision forging/die-cutting/forming designed by SuperLift++-+-+ top engineers ensure uniform parts for a hassle-free fit! Include 4 Superide shocks with yellow boots. Hardware kit for Cummins diesels sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994.5-1998 Dodge Pickup - Full Size Ram 2500; 3500 without Top-mount Overload Rear Springs Daystar Front Lift Kit FRONT LIFT/LEVELING KIT Maintains stock ride quality while giving your truck a balanced look! Eliminates droop or "dive" of factory suspension Here's the easy way to level the front of your truck! Long-lasting Dura-Thane? coil spring spacers mount above coil springs. Kit raises right and left sides. Applications:1994-2001 Dodge Pickup - Full Size Ram 1500; 2500 Pickup and 3500 Pickup with 4WD (inc.Integral Mounting Plate),2002-2003 Dodge Pickup - Full Size Ram 2500/3500 4WD (inc. Integral Mounting Plate) Superlift Suspension Lift Kits SUSPENSION LIFT KIT Improves suspension performance, provides a great off-road look and makes room for larger tires and wheels Available with or without 4 Superide shocks with yellow boots For '73-97 Chevy/GMC pickups Premium steel and precision forging, die-cutting and forming ensure uniform parts for a hassle-free fit! '73-87 kits have Superide front springs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1988-1993 Chevrolet C/K Pickup K1500 and K2500 Pickup (w/6-lug wheels and 2-bolt idler arm mount) 4wd; 4" Lift; with Shocks,1988-1993 GMC C/K Pickup K1500 and K2500 Pickup (w/6-lug wheels and 2-bolt idler arm mount) 4wd; 4" Lift; with Shocks Suspension Lift Kit SUSPENSION LIFT KIT For 4WD Toyota pickups and Landcruisers Provides extra lift along with great handling! Adds needed clearance for bigger wheels and tires and safe off-roading without sacrificing riding comfort and control Precision built kit includes everything needed to complete the lift and perform year after year. Kit includes 4 Explorer shocks (except Tacoma, which retains use of factory front shocks). Pickup kit has necessary brackets and hardware to lift truck while maintaining factory steering geometry and ride quality. Landcruiser kit has 4 leaf springs and hardware. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. For '86-95 Toyota pickups: Stage 2 kit includes performance lateral compression struts and spindle spacers. Applications:1975-1980 Toyota Land Cruiser FJ40 Tuff Country Suspension Lift Kit SUSPENSION LIFT KIT Essential when you want to raise your truck, but don't want to sacrifice riding comfort Includes front EZ-Ride leaf springs with urethane bushings, front U-bolts, front spring eye bolts, rear blocks with U-bolts and brake line relocating brackets Recommended fro small-block engines only 6" lift kit also includes front sway bar drop bracket and transfer case drop kit. Shocks not included. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup 3/4-ton 4WD,1973-1987 GMC C/K Pickup 3/4-ton 4WD Superlift 4"/3" Lift Kit 4"/3" LIFT KIT Retains factory ride quality, steering geometry and CV axle angles Increases wheel travel Kit includes: new nodular iron spindles (better than ball joint spacers); full-width differential/control arm cross members (for lateral rigidity); front and rear Superide shocks with yellow boots; 3" rear blocks. Front drive shaft (SKU# 48ZX7482XF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:2000-2001 Ford Ranger 4WD Fabtech Complete 2WD Lift Kits COMPLETE 2WD LIFT KIT Lift your truck up to 4" for the look and feel of a 4WD vehicle Complete kit includes front coil springs; upper control arms; rear lift blocks and U-bolts or add-a-leaf springs; adjustable front shocks; performance rear shocks; hardware; instructions. Shocks come with a limited lifetime warranty. Shocks feature hydraulic foam cell construction; chrome-plated 9/16" diameter hardened rod; polyurethane bushings; massive 1-3/8" diameter piston; high-flow 9-stage valving. Front shocks also have 3-way adjustability for "customized" settings. Bolt-on installation. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes ball joints with the control arms. Applications:1999-2000 Chevrolet C/K Pickup with 6-lug Wheels and Standard Cab,1999-2000 GMC C/K Pickup with 6-lug Wheels and Standard Cab Ground Force Complete Lowering Kits COMPLETE LOWERING KIT Save 20% on Selected Items! One easy-to-afford kit lets you hit the ground running with a sleeker look and hotter handling! Top-quality, fully ISO 9000 certified system includes everything you need to lower your truck Every component is precision matched to achieve that customized effect When lowering your truck, you can take chances or you can get Ground Force++-+-+ and know the components you receive will be the finest available. Casting, shock absorbers, coil springs and leaf springs are manufactured within fully ISO 9000 certified quality systems. C-section frame inserts are made of the same metals used in the original factory truck frame to ensure compatibility. The specially-tuned high-pressure nitrogen-gas-charged shocks are designed for top performance and positive suspension control. Front coils retain a factory-like ride. Ductile iron blocks and U-bolts lower rear and correct driveline angle. All steel components are powder coated for corrosion resistance and show-truck appearance. Manufacturer's limited lifetime warranty. C=coils; B-blocks and U-bolts; S=spindles; SH=shackles and hangers. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1998-2000 Dodge Pickup - Full Size Ram with Quad Cab 1500 (GVW 6800 lbs.) Front Drop 2"C; Rear Drop 4"SH Explorer Pro Comp 2WD 3" Lift Kits 2WD 3" LIFT SPINDLE SUSPENSION SYSTEM KIT Dramatically improves your ride and handling...on the highway and off-road Kit includes spindles, 1.5" add-a-leaf and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-2000 Ford Ranger Pro Comp 2WD Lift Kit for Ford 2WD LIFT SUSPENSION SYSTEM KIT FOR FORD Now is the time to dramatically improve the ride and handling on your truck! Kit includes coils, box kit, rear block kit, Pitman arm, 4 ES 3000 shocks and brake lines (lines not required on 4" kit). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1982-1989 Ford F-Series Pickup F150 Standard Pro-Comp 6" Pro-Ride Lift System 2WD 6" LIFT PRO RIDE SUSPENSION SYSTEM KIT For a great off-road look, improved suspension performance and to make room for larger tires and wheels Kit includes upper A-arms, spindles, coils, brake lines, 1.5" add-a-leaf, 2.5" rear block kit and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2001 Chevrolet C/K Pickup C1500,1999-2001 GMC C/K Pickup C1500 Rough Country 4" Lift Kit COMPLETE 4" LIFT KIT Built to withstand conditions that cause stock suspensions to fail Make sure your truck's ready for the trail or off-road driving?raise its height for increased ground clearance and better protection Kit also allows room for larger tires and wheels Includes 4 Hydro 8000 shock absorbers with black boots. Radial-tuned shocks feature velocity-sensitive valving plus urethane bushings to stand up to rough terrain or heavy hauling. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 GMC C/K Pickup,1973-1987 Chevrolet C/K Pickup Rough Country Lift Block Kits REAR AXLE LIFT BLOCK KIT Raises the rear of your truck allowing additional clearance for bigger tires/wheels or during off-road excursions For use when leaf springs are mounted above axle Strong cast-iron blocks raise truck's chassis and body Kit includes 2 blocks, 4 ultra-strong C1541 steel U-bolts and hardware. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1967-1979 Ford Bronco - Full Size 4WD Rough Country Suspension Lift Kit SUSPENSION LIFT KITS Allow more wheel travel and space for larger tires Raise vehicle's height up to 4" for increased ground clearance, better protection and control off-road as well as more comfort on the highway Stand up to conditions that cause stock suspensions to fail. Include everything needed to complete the lift, except shocks. Major heavy-duty components in each kit vary by application. Complete new and improved suspension package with Heckethorn shocks and steering stabilizers (all sold separately), designed to enhance the performance characteristics of these Rough Country++-+-+ suspension kits. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1984-1992 Jeep Wagoneer XJ 4WD Rough Country Suspension Lift Kits With Shocks SUSPENSION LIFT KITS WITH SHOCKS Raise pickup for increased ground clearance on larger tires For '70-98 American 4WD pickups All heavy-duty components made by Rough Country++-+-+ (acknowledged manufacturer of the best suspensions) to survive years of hard usage. Include radial-tuned velocity-sensitive valving and huge capacity and oversized construction, Hydro 8000 shocks stand up to all terrain and driving demands without sacrificing ride quality. Urethane bushings extend shock life. Kits include 4 shocks with black dust boots. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup 4" lift 1/2-ton 4WD,1973-1987 GMC C/K Pickup 4" lift 1/2-ton 4WD,1973-1987 GMC C/K Pickup 1/2-ton 4WD Stage 2 Suspension 4" Lift Kit STAGE 2 SUSPENSION 4" LIFT KIT Lifts front 4, rear 2-1/2" Front leaf spring, front shock kit and shock boots sold separately For Ford full-size pickups Complete system lets you install up to 35" x 12.5" x 16.5" tires on 16.5" x 9.75" wheels without impairing factory ride or payload capacity. Engineered and built to handle the punishment the Super Duty was meant to take. All items shipped in separate cartons from factory. Cannot be shipped express. NOTE: To achieve the lift desired, you must order one lift kit and 2 front springs (sold separately). Applications:1999 Ford F-Series Pickup Super-duty Superlift Suspension Lift Kits SUSPENSION LIFT KIT Improves suspension performance, provides a great off-road look and makes room for larger tires and wheels Available with or without 4 Superide shocks with yellow boots For '73-97 Chevy/GMC pickups Premium steel and precision forging, die-cutting and forming ensure uniform parts for a hassle-free fit! '73-87 kits have Superide front springs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup K10; K1500; 4" Lift; without Shocks,1973-1991 Chevrolet Blazer - Full Size K5; 4" Lift; without Shocks,1973-1991 Chevrolet Suburban 1/2-ton 4wd.; 4" Lift; without Shocks,1973-1987 GMC C/K Pickup K10; K1500; 4" Lift; without Shocks,1973-1991 GMC Jimmy - Full Size 4" Lift; without Shocks,1973-1991 GMC Suburban 1/2-ton 4wd.; 4" Lift; without Shocks Suspension Lift Kit SUSPENSION LIFT KIT For 4WD Toyota pickups and Landcruisers Provides extra lift along with great handling! Adds needed clearance for bigger wheels and tires and safe off-roading without sacrificing riding comfort and control Precision built kit includes everything needed to complete the lift and perform year after year. Kit includes 4 Explorer shocks (except Tacoma, which retains use of factory front shocks). Pickup kit has necessary brackets and hardware to lift truck while maintaining factory steering geometry and ride quality. Landcruiser kit has 4 leaf springs and hardware. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. For '86-95 Toyota pickups: Stage 2 kit includes performance lateral compression struts and spindle spacers. Applications: All Makes All Models Tuff Country Extended Radius Arms EXTENDED RADIUS ARMS 15" longer than factory specs to improve ground clearance Is your Ford lifted up to 6"? These arms are 15" longer than factory specs to improve ground clearance, allowing a sharper turning radius and improved articulation. Rear mounting brackets use a pivoting axis for better off-road performance. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1983-1997 Ford Ranger 2" to 4" Lift Tuff Country Leveling Kits 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Super-duty F250 & F350 with Gas Engine Tuff Country Suspension Kits SUSPENSION LIFT KIT Complete high-lift kit for a smoother ride and easier handling Great for larger tires, driving off-road or tackling foul weather Laser cut brackets for exact fit Installs with no driveline modifications required (provided front factory driveshaft is properly balance). Includes 4 Tuff Country? SX8000 gas shocks with red shock boots, upper and lower control arm brackets, front and rear crossmembers, steering link, differential drop brackets, steering assist unit, lateral compression arms, rear add-a-leaf, rear blocks and U-bolts. Vehicle can easily be returned to stock height if desired. Shipped separately in multiple cartons from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2000 Chevrolet Silverado 1500 4WD 6" Lift,1999-2000 GMC Sierra 1500 4WD 6" Lift Tuff Country Suspension Lift Kits SUSPENSION LIFT KIT Get that rugged off-road look?lifts your truck up to 6" Gives added tire clearance for larger tires plus sure-footed performance Handles rough off-road conditions while maintaining a comfortable ride Performance kits include extended radius arms. Shocks sold separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1981-1996 Ford F-Series Pickup F150 (economy),1981-1996 Ford Bronco - Full Size (economy) Western Chassis Suspension Drop Kits SUSPENSION DROP KIT Every component is quality manufactured for safety and durability to ensure top performance The best way to drop your 2WD truck! Innovative Smooth Rider coil springs (where applicable) are specifically engineered for each individual application. Drop spindles (where applicable) are CNC machined of high-strength ductile iron. Kit with rear blocks have pinion angle correction to ensure less strain on driveline. Easy installation. Manufacturer's limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Kit Contents A: Front drop coil B: Rear pinion angle drop block kit C: Front drop spindle D: Rear drop leaf spring E: A-arm F: Rear drop coil G: Rear drop shackle and hanger kit H: Rear drop flip kit only J: "C" section kit K: Bump stops L: Carrier-bearing bracket Applications:1982-2001 Chevrolet S10 Pickup Standard Cab 4-cyl.,1982-2001 GMC S-15 Pickup Standard Cab 4-cyl. Belltech Front Spindles FRONT SPINDLES Save 20%! Lower front of 2WD pickup 2" Improve handling while maintaining factory-ride quality and steering geometry Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers award-winning dropped spindles as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Spindles maintain critical suspension geometry, eliminating excessive ball joint, shock and tire wear common to other lowering methods. Ultra-strong ductile iron. Sold in pairs. Spindles will not fit all-wheel-drive vehicles. (A) '88-89 C1500 Pickup Standard Cab requires alignment kit 47ZX4046U. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2000 Chevrolet C/K Pickup C1500 Standard Cab; Short Bed & minimum 15" wheel,1999-2000 GMC C/K Pickup C1500 Standard Cab; Short Bed & miniumum 15" wheel,1999-2000 Chevrolet C/K Pickup C1500 Extended Cab; Short Bed & minimum 15" wheel,1999-2000 GMC C/K Pickup C1500 Extended Cab; Short Bed & minimum 15" wheel Belltech Front Coil Springs FRONT COIL SPRINGS Save 20% On Selected Items! Lower 2WD pickups 1" to 3" Work with or without dropped front spindles Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers chromium alloy steel coil springs as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Springs are wound, shot peened and powder coated to exact specifications to ensure proper ride height, ride quality and long life. Sold in pairs. Springs will not fit all-wheel-drive vehicles. (A) '97-01 Ford F150 and F250: Alignment kit 47ZX4062A recommended for 3" front, 4" rear drop. (B) '89-97 Ford Ranger: Alignment kit 47ZX4063R recommended. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2001 Chevrolet C/K Pickup C1500 Standard Cab; Short Bed,1999-2001 GMC C/K Pickup C1500 Standard Cab; Short Bed Belltech Rear Leaf Springs REAR LEAF SPRING Made of precision alloy steel, oil tempered and heat treated for uniform strength and spring action Correct lean and rear-end sag, improve traction and reduce sway Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers a rear leaf spring as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Install in pairs to distribute weight equally for a more level ride. Springs will not fit all-wheel-drive vehicles. Applications:1982-2001 Chevrolet S10 Pickup 4-cyl.,1982-2001 GMC S-15 Pickup 4-cyl.,1982-2001 GMC Sonoma 4-cyl.,1982-1995 Chevrolet S10 Pickup 6-cyl.,1982-1995 GMC S-15 Pickup 6-cyl.,1982-1995 GMC Sonoma 6-cyl.,1982-1994 Chevrolet S10 Blazer,1983-1994 GMC S-15 Jimmy Belltech Rear Lowering Block Kit REAR LOWERING BLOCK KIT Made of high-quality extruded aluminum Lower the rear of your truck in either 1, 2" or 3" increments Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers this kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit includes 1/2" diameter cold-rolled U-bolts, SAE-plated washers and self-locking Nyloc? nuts. Lowering kit will not fit all-wheel-drive vehicles. Applications:1982-2001 Chevrolet S10 Pickup Standard Cab (exc. '96-01 V6),1982-2001 GMC S-15 Pickup Standard Cab (exc. '96-01 V6),1982-2001 GMC Sonoma Standard cab (exc. '96-01 V6),1983-1997 Chevrolet S10 Blazer,1983-1997 GMC S-15 Jimmy Belltech Rear Shackle/Hanger Kits REAR HANGER AND SHACKLE KIT Save 20% on Selected Items! Lowers rear of truck 4" while maintaining original ride quality Durable powder-coat finish Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2000 Chevrolet C/K Pickup C1500 Extended Cab; Short Bed,1999-2000 GMC C/K Pickup C1500 Extended Cab; Short Bed Belltech Rear Flip Kit REAR FLIP KIT Save 20% on Selected Items! Relocate the rear axle on top of the rear leaf spring pack for lowest drop possible! Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Includes contoured, heavy-duty C-sections, heliarc-welded saddles, spring plates and shock extension with tough powder-coat finish, 5/8" U-bolts, top-grade hardware and instructions. For the ultimate drop, use with front spindles and springs (both sold separately). Flip kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1989-1997 Ford Ranger Standard Cab Tuff Country Alignment Brackets ALIGNMENT BRACKETS Trouble aligning your lifted truck? These brackets are the perfect solution! Restore your 1.5" to 2.5" lifted truck to the proper geometry by dropping the passenger's and driver's side axles Camber-adjustment bolts to ensure precise alignment included Sold in pairs. Applications:1997 Ford F-Series Pickup F250 Superlift 4" Lift Kit 4" LIFT KIT Retains factory ride quality, and steering geometry and CV axle angles Includes new rear springs Especially for 4WDs! New nodular iron spindles incorporate a raised ball joint boss to eliminate need to replace upper control arm. Front anti-sway bar links are extra long to maintain factory bar geometry. Full-width differential/control arm cross members for lateral rigidity. With front and rear Superide shocks with yellow boots. Front drive shaft (SKU# 48ZX8522RF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1996-2001 Ford Explorer 4WD Tuff Country 4" Suspension Lift Kit 4" SUSPENSION LIFT KIT Eliminates a sagging front end Combines spindle and one-piece sub-frame to reduce number of brackets and dramatically cut installation time Allows use of 33" tires Kit includes all necessary parts to achieve the lift, excluding shocks. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1997-2001 Ford F-Series Pickup F150 4WD with 5.4L Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Dodge Pickup - Full Size Ram 1500 4WD (exc. Factory Off-road Package),1994-2001 Dodge Pickup - Full Size Ram 1500 4WD (exc. Factory Off-road Package) Superlift 6" Lift Kit 6" LIFT KIT Maintains factory ride quality and keeps steering and CV operating angles within factory limits Front suspension, steering and differential are all dropped 6"! Retains all factory steering linkage Center-link stabilizing link ensures more responsive steering and longer Pitman/idler arm life. Allows use of most 35" tires. Front lift can be raised from 6" to 7.5" by adjusting torsion bar. For easier steering, stabilizer is recommended for 3/4- and 1-ton trucks (sold separately; SKU# 48ZX7493UF). Kit includes front and rear shocks (2 shocks for each front wheel on 1/2 ton). Optional front drive shaft (sold separately; SKU# 48ZX7492WF) required for trucks with Autotrac front drive and recommended for 3/4- and 1-ton trucks with part-time transfer case operating over 25 MPH in four-wheel-drive. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2001 Chevrolet Silverado K2500 HD Pickup,1999-2001 GMC Sierra K2500 HD Pickup,2001 Chevrolet Silverado K3500 HD Pickup,2001 GMC Sierra K3500 HD Pickup Tuff Country IFS Lift Suspension System IFS LIFT SUSPENSION SYSTEM Installing an IFS lift system on a Chevy/GM truck has always been a really tough job?until now! System uses a combination of new spindles and a one-piece sub-frame to reduce the number of brackets required, simplifying installation procedures and drastically cutting installation time! Kit includes all components required for lift, excluding shocks Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Click on SKU# for additional product information. Applications:1988-1998 Chevrolet C/K Pickup K1500 Pickup 4WD,1988-1998 GMC C/K Pickup K1500 Pickup 4WD Truspeed Custom-Fit Speed Sensor Calibrator TRUSPEED CUSTOM-FIT SPEED SENSOR CALIBRATOR Easily adjusts your speedometer/odometer after installing larger or smaller tires on your computer-controlled truck! Installs in-line with the sensor and recalibrates signal sent to the computer Corrects speed signal for engine, powertrain and ABS controls 2 settings for seasonal tire changes. Precise speed-signal calibration to within 1%. Easy to recalibrate for future tire and/or gear changes. Speedometer reading, ABS functions and transmission shift points are corrected for non-stock tire size. 4-wire installation. Applications:1992-1993 Ford Bronco - Full Size,1999-2001 Ford Excursion,1998-2001 Ford Expedition 4WD,1993-1997 Ford Explorer,1992-1997 Ford Ranger,1992-1993 Ford F-Series Pickup F150; F250; F350,1994-1996 Ford F-Series Pickup F150; F250; F350; with 2-wheel ABS only,1997-2000 Ford F-Series Pickup F150 4WD; Light-duty F250 4WD,1997-1998 Ford F-Series Pickup Heavy-duty F250/F350 with 2-wheel ABS only,1999-2001 Ford F-Series Pickup Super-duty F250/F350,1997-2001 Lincoln Navigator 4WD,1992-1997 Mercury Mountaineer,1993-1998 Toyota Land Cruiser,2000 Toyota Tundra,1998-1999 Toyota Tacoma,1993-1998 Toyota 4Runner,1992-1994 Toyota Pickup Tuff Country Leveling Kits Promo 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Engine Type: Diesel Engine; Sub Model: Super-duty F250; F350; Wheel Drive: 4WD Tuff Country Leveling Kits Promo Gloves 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Engine Type: Diesel Engine; Sub Model: Super-duty F250; F350; Wheel Drive: 4WD 2" Add-A-Leaf Kit 2" ADD-A-LEAF KIT Recommended for use with a snow plow Adds overall 1-1/2" to 2" lift?exact lift will vary, depending on engine size and accessories. Kit includes 2 leaf springs for front or rear and center bolts. (Can also use lift kit on rear.) Add-a-leafs not intended for use with other devices to lift vehicles. Note: Longer shocks recommended, but not required. Applications:1941-1975 Jeep CJ2A,1941-1975 Jeep CJ3A,1941-1975 Jeep CJ5,1941-1975 Jeep CJ6,1941-1975 Jeep MB,1941-1975 Jeep M38,1941-1975 Jeep M38A1,1947-1962 Jeep Utility Body Lift Kits BODY LIFT KITS FOR 2WD AND 4WD TRUCKS Raise your truck a full 2" or 3" Designed and tested to withstand the toughest off-road punishment Give your truck that "off-road look" and ability Provide the extra clearance you need for travel over rough, rocky terrain? allow use of big tires or wheels without fender well modifications. Large graphite and glass-impregnated nylon body blocks provide maximum support with minimum weight increase. All necessary blocks, bolts, spacers, adapters and instructions included. Front Bumper Raising Kit available for '88-94 Chevy/GMC standard and extended cab 1/2- and 3/4-ton pickups, and '92-94 Tahoe, Yukon and Suburban. Eliminates the gap between the body and the top of the bumper when a body lift kit is installed. Includes all the hardware necessary to raise the bumper. 2" or 3" kit available. NOTE: Installation requires 2 people and approx. 1/2 day. Product SKU numbers ending in "F" are shipped separately from the factory. (A) Front bumper brackets included. (B) Front and rear bumper brackets included. (C) Require front bumper raising kit (not shown) sold separately below. Applications:1994 Chevrolet S10 Pickup,1994 GMC S-15 Pickup,1994 GMC Sonoma 3" Lift Kit for 2WD Pickup 3" LIFT KIT For American 2WD pickups Adds a 4WD look to your 2WD! Gives your pickup a more aggressive stance Designed and manufactured by Explorer to ensure proper handling and extended service life. Provides room for larger tires and wheels. Improves vision in traffic or off-road. Adds more ground clearance?a must on trails or fields. Designed and manufactured to ensure proper handling and extended service life. Kit includes 3" lift heavy-duty front spindles and front and rear ES1000 performance shock absorbers. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes rear add-a-leaf springs. (B) Includes rear lift blocks and U-bolts. Applications:1998-2000 Ford Ranger 3" Lift Kit Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2002 Dodge Pickup - Full Size Ram 2500; 3500 4WD (exc. Factory Off-road Package) Air Lift Easy Street Remote Control REMOTE CONTROL Can be used with any of the BadBoy++-+-+ Air Management Systems 300-ft. range 4 channels Applications: All Makes All Models Air Lift EasyStreet Big-Port 1/2" NPT Bags BIG-PORT 1/2" NPT BAG Save 20% ! Designed for unrestricted airflow All-aluminum end plates Bellows include top and bottom roll plates Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models (Replaces Firestone 255C) Air Management Systems FULL AIR CONVERSION SPORT SUSPENSION SYSTEM KITS Save 20%! Maintains integrity of hydro-formed frame Easy bolt-on design?no welding and minimal cutting Extended-length panhard rod keeps rear axle centered at all times From an industry leader, these systems are engineered to provide the maximum amount of lowering while retaining the integrity of the suspension. You'll have a sensational slammed look for show yet still be able to raise your truck to a safe, comfortable ride height for driving. Rear air springs are mounted outside frame for maximum lowering. Front kit includes air springs, brackets, shocks, shock-relocation brackets, hardware, air line and fittings. Rear kit includes air springs, upper and lower brackets, control arms, panhard rod, hardware, air lines and fittings. Compressors sold separately. Manufacturer's limited one-year warranty. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models Belltech Complete Lowering Kits COMPLETE LOWERING KITS For Chevy/GMC, Dodge and Ford trucks and SUVs Everything you need in one handy package to lower your truck the right way Only the finest quality components?specifically designed for a great fit and long life Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Coil Spring Kit Contents: A=Front coils, rear hanger/shackle kit, front and rear shocks B=Front coils, rear hanger/shackle kit, front and rear shocks, driveline alignment kit C=Front coils, rear blocks, U-bolts, front and rear shocks D=Front and rear coil springs, shocks and rear-limiting straps E=Front coil springs, rear air back bracket, front and rear shocks, rear-limiting straps Applications:1994-2000 Chevrolet S10 Pickup Extended Cab inc. Extreme,1994-2000 GMC S-15 Pickup Extended Cab inc. Extreme Complete Suspension Lift Kits COMPLETE SUSPENSION LIFT KITS Great off-road look 2-1/2, 3" and 5" lifts available For '94-98 Dodge Ram pickups Improve suspension performance while making room for larger tires and wheels. Premium steel and precision forging/die-cutting/forming designed by SuperLift++-+-+ top engineers ensure uniform parts for a hassle-free fit! Include 4 Superide shocks with yellow boots. Hardware kit for Cummins diesels sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998 Dodge Pickup - Full Size Ram 1500 4WD Daystar Front Lift Kit FRONT LIFT/LEVELING KIT Maintains stock ride quality while giving your truck a balanced look! Eliminates droop or "dive" of factory suspension Here's the easy way to level the front of your truck! Long-lasting Dura-Thane? coil spring spacers mount above coil springs. Kit raises right and left sides. Applications:1997-2003 Ford F-Series Pickup F150 2WD Dominator Solenoid Valve DOMINATOR SOLENOID VALVE SMC solenoid with brass body and 1/2" NPT ports 15mm orifice CV=5.5 Applications: All Makes All Models Fabtech Complete 2WD Lift Kits COMPLETE 2WD LIFT KIT Lift your truck up to 4" for the look and feel of a 4WD vehicle Complete kit includes front coil springs; upper control arms; rear lift blocks and U-bolts or add-a-leaf springs; adjustable front shocks; performance rear shocks; hardware; instructions. Shocks come with a limited lifetime warranty. Shocks feature hydraulic foam cell construction; chrome-plated 9/16" diameter hardened rod; polyurethane bushings; massive 1-3/8" diameter piston; high-flow 9-stage valving. Front shocks also have 3-way adjustability for "customized" settings. Bolt-on installation. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes ball joints with the control arms. Applications:1998-1999 Ford Ranger without Preinstalled Ball Joints Ground Force Complete Lowering Kits COMPLETE LOWERING KIT Save 20% on Selected Items! One easy-to-afford kit lets you hit the ground running with a sleeker look and hotter handling! Top-quality, fully ISO 9000 certified system includes everything you need to lower your truck Every component is precision matched to achieve that customized effect When lowering your truck, you can take chances or you can get Ground Force++-+-+ and know the components you receive will be the finest available. Casting, shock absorbers, coil springs and leaf springs are manufactured within fully ISO 9000 certified quality systems. C-section frame inserts are made of the same metals used in the original factory truck frame to ensure compatibility. The specially-tuned high-pressure nitrogen-gas-charged shocks are designed for top performance and positive suspension control. Front coils retain a factory-like ride. Ductile iron blocks and U-bolts lower rear and correct driveline angle. All steel components are powder coated for corrosion resistance and show-truck appearance. Manufacturer's limited lifetime warranty. C=coils; B-blocks and U-bolts; S=spindles; SH=shackles and hangers. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1994-2000 Dodge Pickup - Full Size Ram (exc. Quad Cab) 2500 (GVW 7500 lbs.) Front Drop 2"C; Rear Drop 4"SH,1994-2000 Dodge Pickup - Full Size Ram (exc. Quad Cab) 1500 (GVW 6400 lbs.) Front Drop 2"C; Rear Drop 4"SH,1994-2000 Dodge Pickup - Full Size Ram (exc. Quad Cab) 1500 (GVW 6010 lbs.) Front Drop 2"C; Rear Drop 4"SH Explorer Pro Comp 2WD 3" Lift Kits 2WD 3" LIFT SPINDLE SUSPENSION SYSTEM KIT Dramatically improves your ride and handling...on the highway and off-road Kit includes spindles, 1.5" add-a-leaf and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1997-2001 Ford F-Series Pickup F150 Pro Comp 2WD Lift Kit for Ford 2WD LIFT SUSPENSION SYSTEM KIT FOR FORD Now is the time to dramatically improve the ride and handling on your truck! Kit includes coils, box kit, rear block kit, Pitman arm, 4 ES 3000 shocks and brake lines (lines not required on 4" kit). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1990-1996 Ford F-Series Pickup F150 Extended Pro-Comp 6" Pro-Ride Lift System 2WD 6" LIFT PRO RIDE SUSPENSION SYSTEM KIT For a great off-road look, improved suspension performance and to make room for larger tires and wheels Kit includes upper A-arms, spindles, coils, brake lines, 1.5" add-a-leaf, 2.5" rear block kit and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1997-2001 Ford F-Series Pickup F150 Extended Cab Rough Country Lift Block Kits REAR AXLE LIFT BLOCK KIT Raises the rear of your truck allowing additional clearance for bigger tires/wheels or during off-road excursions For use when leaf springs are mounted above axle Strong cast-iron blocks raise truck's chassis and body Kit includes 2 blocks, 4 ultra-strong C1541 steel U-bolts and hardware. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1974-1985 Toyota Pickup,1984-1985 Toyota 4Runner Rough Country Suspension Lift Kit SUSPENSION LIFT KITS Allow more wheel travel and space for larger tires Raise vehicle's height up to 4" for increased ground clearance, better protection and control off-road as well as more comfort on the highway Stand up to conditions that cause stock suspensions to fail. Include everything needed to complete the lift, except shocks. Major heavy-duty components in each kit vary by application. Complete new and improved suspension package with Heckethorn shocks and steering stabilizers (all sold separately), designed to enhance the performance characteristics of these Rough Country++-+-+ suspension kits. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1984-2000 Jeep Cherokee XJ 4WD Rough Country Suspension Lift Kits With Shocks SUSPENSION LIFT KITS WITH SHOCKS Raise pickup for increased ground clearance on larger tires For '70-98 American 4WD pickups All heavy-duty components made by Rough Country++-+-+ (acknowledged manufacturer of the best suspensions) to survive years of hard usage. Include radial-tuned velocity-sensitive valving and huge capacity and oversized construction, Hydro 8000 shocks stand up to all terrain and driving demands without sacrificing ride quality. Urethane bushings extend shock life. Kits include 4 shocks with black dust boots. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1980-1996 Ford F-Series Pickup 2-1/2" lift 1/2-ton 4WD,1980-1996 Ford F-Series Pickup 2-1/2" lift 1/2-ton 4WD Stage 2 Suspension 4" Lift Kit STAGE 2 SUSPENSION 4" LIFT KIT Lifts front 4, rear 2-1/2" Front leaf spring, front shock kit and shock boots sold separately For Ford full-size pickups Complete system lets you install up to 35" x 12.5" x 16.5" tires on 16.5" x 9.75" wheels without impairing factory ride or payload capacity. Engineered and built to handle the punishment the Super Duty was meant to take. All items shipped in separate cartons from factory. Cannot be shipped express. NOTE: To achieve the lift desired, you must order one lift kit and 2 front springs (sold separately). Applications: All Makes All Models Superlift Suspension Lift Kits SUSPENSION LIFT KIT Improves suspension performance, provides a great off-road look and makes room for larger tires and wheels Available with or without 4 Superide shocks with yellow boots For '73-97 Chevy/GMC pickups Premium steel and precision forging, die-cutting and forming ensure uniform parts for a hassle-free fit! '73-87 kits have Superide front springs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup K10; K1500; 2-1/2" Lift; without Shocks,1973-1991 Chevrolet Blazer - Full Size K5; 2-1/2" Lift; without Shocks,1973-1991 Chevrolet Suburban 1/2-ton 4WD; 2-1/2" Lift; without Shocks,1973-1987 GMC C/K Pickup K10; K1500; 2-1/2" Lift; without Shocks,1973-1991 GMC Jimmy - Full Size 2-1/2" Lift; without Shocks,1973-1991 GMC Suburban 1/2-ton 4WD; 2-1/2" Lift; without Shocks Suspension Lift Kit SUSPENSION LIFT KIT For 4WD Toyota pickups and Landcruisers Provides extra lift along with great handling! Adds needed clearance for bigger wheels and tires and safe off-roading without sacrificing riding comfort and control Precision built kit includes everything needed to complete the lift and perform year after year. Kit includes 4 Explorer shocks (except Tacoma, which retains use of factory front shocks). Pickup kit has necessary brackets and hardware to lift truck while maintaining factory steering geometry and ride quality. Landcruiser kit has 4 leaf springs and hardware. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. For '86-95 Toyota pickups: Stage 2 kit includes performance lateral compression struts and spindle spacers. Applications: All Makes All Models Tuff Country Extended Radius Arms EXTENDED RADIUS ARMS 15" longer than factory specs to improve ground clearance Is your Ford lifted up to 6"? These arms are 15" longer than factory specs to improve ground clearance, allowing a sharper turning radius and improved articulation. Rear mounting brackets use a pivoting axis for better off-road performance. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1980 Ford F-Series Pickup F150 Pickup; 6" Lift,1980-1996 Ford Bronco - Full Size 6" Lift Tuff Country Leveling Kits 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Super-duty F250 & F350 with Gas Engine Tuff Country Suspension Kits SUSPENSION LIFT KIT Complete high-lift kit for a smoother ride and easier handling Great for larger tires, driving off-road or tackling foul weather Laser cut brackets for exact fit Installs with no driveline modifications required (provided front factory driveshaft is properly balance). Includes 4 Tuff Country? SX8000 gas shocks with red shock boots, upper and lower control arm brackets, front and rear crossmembers, steering link, differential drop brackets, steering assist unit, lateral compression arms, rear add-a-leaf, rear blocks and U-bolts. Vehicle can easily be returned to stock height if desired. Shipped separately in multiple cartons from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2000 Chevrolet Silverado 1500 4WD 4" Lift,1999-2000 GMC Sierra 1500 4WD 4" Lift Tuff Country Suspension Lift Kits SUSPENSION LIFT KIT Get that rugged off-road look?lifts your truck up to 6" Gives added tire clearance for larger tires plus sure-footed performance Handles rough off-road conditions while maintaining a comfortable ride Performance kits include extended radius arms. Shocks sold separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1970-1979 Ford F-Series Pickup F100 & F150 4WD Western Chassis Suspension Drop Kits SUSPENSION DROP KIT Every component is quality manufactured for safety and durability to ensure top performance The best way to drop your 2WD truck! Innovative Smooth Rider coil springs (where applicable) are specifically engineered for each individual application. Drop spindles (where applicable) are CNC machined of high-strength ductile iron. Kit with rear blocks have pinion angle correction to ensure less strain on driveline. Easy installation. Manufacturer's limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Kit Contents A: Front drop coil B: Rear pinion angle drop block kit C: Front drop spindle D: Rear drop leaf spring E: A-arm F: Rear drop coil G: Rear drop shackle and hanger kit H: Rear drop flip kit only J: "C" section kit K: Bump stops L: Carrier-bearing bracket Applications:1967-1972 Chevrolet C/K Pickup Standard Cab V8,1967-1972 GMC C/K Pickup Standard Cab Belltech Front Spindles FRONT SPINDLES Save 20%! Lower front of 2WD pickup 2" Improve handling while maintaining factory-ride quality and steering geometry Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers award-winning dropped spindles as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Spindles maintain critical suspension geometry, eliminating excessive ball joint, shock and tire wear common to other lowering methods. Ultra-strong ductile iron. Sold in pairs. Spindles will not fit all-wheel-drive vehicles. (A) '88-89 C1500 Pickup Standard Cab requires alignment kit 47ZX4046U. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1988-1989 Chevrolet C/K Pickup C1500 Standard Cab (exc. SS454),1988-1989 GMC C/K Pickup C1500 Standard Cab (exc. SS454) Belltech Front Coil Springs FRONT COIL SPRINGS Save 20% On Selected Items! Lower 2WD pickups 1" to 3" Work with or without dropped front spindles Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers chromium alloy steel coil springs as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Springs are wound, shot peened and powder coated to exact specifications to ensure proper ride height, ride quality and long life. Sold in pairs. Springs will not fit all-wheel-drive vehicles. (A) '97-01 Ford F150 and F250: Alignment kit 47ZX4062A recommended for 3" front, 4" rear drop. (B) '89-97 Ford Ranger: Alignment kit 47ZX4063R recommended. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1988-1998 Chevrolet C/K Pickup C1500 Standard Cab (exc. SS454),1988-1998 GMC C/K Pickup C1500 Standard Cab (exc. SS454) Belltech Rear Leaf Springs REAR LEAF SPRING Made of precision alloy steel, oil tempered and heat treated for uniform strength and spring action Correct lean and rear-end sag, improve traction and reduce sway Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers a rear leaf spring as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Install in pairs to distribute weight equally for a more level ride. Springs will not fit all-wheel-drive vehicles. Applications:1998-2000 Ford Ranger Belltech Rear Lowering Block Kit REAR LOWERING BLOCK KIT Made of high-quality extruded aluminum Lower the rear of your truck in either 1, 2" or 3" increments Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers this kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit includes 1/2" diameter cold-rolled U-bolts, SAE-plated washers and self-locking Nyloc? nuts. Lowering kit will not fit all-wheel-drive vehicles. Applications:1982-2001 Chevrolet S10 Pickup Standard Cab (exc. '96-01 V6),1982-2001 GMC S-15 Pickup Standard Cab (exc. '96-01 V6),1983-1997 Chevrolet S10 Blazer,1983-1997 GMC S-15 Jimmy,1982-2001 GMC Sonoma Standard Cab (exc. '96-01 V6) Belltech Rear Shackle/Hanger Kits REAR HANGER AND SHACKLE KIT Save 20% on Selected Items! Lowers rear of truck 4" while maintaining original ride quality Durable powder-coat finish Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2000 Chevrolet C/K Pickup C1500 Extended Cab; Short Bed,1999-2000 GMC C/K Pickup C1500 Extended Cab; Short Bed Belltech Rear Flip Kit REAR FLIP KIT Save 20% on Selected Items! Relocate the rear axle on top of the rear leaf spring pack for lowest drop possible! Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Includes contoured, heavy-duty C-sections, heliarc-welded saddles, spring plates and shock extension with tough powder-coat finish, 5/8" U-bolts, top-grade hardware and instructions. For the ultimate drop, use with front spindles and springs (both sold separately). Flip kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1987-1996 Ford F-Series Pickup F150 EXtended Cab (exc. diesel) Tuff Country Alignment Brackets ALIGNMENT BRACKETS Trouble aligning your lifted truck? These brackets are the perfect solution! Restore your 1.5" to 2.5" lifted truck to the proper geometry by dropping the passenger's and driver's side axles Camber-adjustment bolts to ensure precise alignment included Sold in pairs. Applications:1980-1996 Ford F-Series Pickup F150,1980-1996 Ford Bronco - Full Size Superlift 4" Lift Kit 4" LIFT KIT Retains factory ride quality, and steering geometry and CV axle angles Includes new rear springs Especially for 4WDs! New nodular iron spindles incorporate a raised ball joint boss to eliminate need to replace upper control arm. Front anti-sway bar links are extra long to maintain factory bar geometry. Full-width differential/control arm cross members for lateral rigidity. With front and rear Superide shocks with yellow boots. Front drive shaft (SKU# 48ZX8522RF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1996-2001 Ford Explorer 4WD,2001 Ford Explorer Sport Trac 4WD Tuff Country Suspension Lift Kit SUSPENSION LIFT KIT Essential when you want to raise your truck, but don't want to sacrifice riding comfort Includes front EZ-Ride leaf springs with urethane bushings, front U-bolts, front spring eye bolts, rear blocks with U-bolts and brake line relocating brackets Recommended fro small-block engines only 6" lift kit also includes front sway bar drop bracket and transfer case drop kit. Shocks not included. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup 1/2-ton 4WD,1973-1987 GMC C/K Pickup 1/2-ton 4WD Superlift 4"/3" Lift Kit 4"/3" LIFT KIT Retains factory ride quality, steering geometry and CV axle angles Increases wheel travel Kit includes: new nodular iron spindles (better than ball joint spacers); full-width differential/control arm cross members (for lateral rigidity); front and rear Superide shocks with yellow boots; 3" rear blocks. Front drive shaft (SKU# 48ZX7482XF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-2001 Ford Ranger 4WD,1996-2001 Ford Explorer 4WD,2001 Ford Explorer Sport Trac 4WD Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-1999 Dodge Durango 4WD,1998-1999 Dodge Durango 4WD Superlift 6" Lift Kit 6" LIFT KIT Maintains factory ride quality and keeps steering and CV operating angles within factory limits Front suspension, steering and differential are all dropped 6"! Retains all factory steering linkage Center-link stabilizing link ensures more responsive steering and longer Pitman/idler arm life. Allows use of most 35" tires. Front lift can be raised from 6" to 7.5" by adjusting torsion bar. For easier steering, stabilizer is recommended for 3/4- and 1-ton trucks (sold separately; SKU# 48ZX7493UF). Kit includes front and rear shocks (2 shocks for each front wheel on 1/2 ton). Optional front drive shaft (sold separately; SKU# 48ZX7492WF) required for trucks with Autotrac front drive and recommended for 3/4- and 1-ton trucks with part-time transfer case operating over 25 MPH in four-wheel-drive. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2001 Chevrolet Silverado K1500-K3500,1999-2001 GMC Sierra K1500-K3500 Tuff Country IFS Lift Suspension System IFS LIFT SUSPENSION SYSTEM Installing an IFS lift system on a Chevy/GM truck has always been a really tough job?until now! System uses a combination of new spindles and a one-piece sub-frame to reduce the number of brackets required, simplifying installation procedures and drastically cutting installation time! Kit includes all components required for lift, excluding shocks Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Click on SKU# for additional product information. Applications:2000-2003 Chevrolet C/K Pickup K2500 HD Pickup 4WD,2000-2003 GMC C/K Pickup K2500 HD Pickup 4WD Tuff Country Leveling Kits Promo LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! Uses 1/4" steel upper coil spring spacer?factory ride is retained. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Dodge Pickup - Full Size Sub Model: Ram 1500; 2500; 3500; Wheel Drive: 4WD Tuff Country Leveling Kits Promo Gloves 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Engine Type: Diesel Engine; Sub Model: Super-duty F250; F350; Wheel Drive: 4WD Western Chassis Suspension Drop Kits SUSPENSION DROP KIT Every component is quality manufactured for safety and durability to ensure top performance The best way to drop your 2WD truck! Innovative Smooth Rider coil springs (where applicable) are specifically engineered for each individual application. Drop spindles (where applicable) are CNC machined of high-strength ductile iron. Kit with rear blocks have pinion angle correction to ensure less strain on driveline. Easy installation. Manufacturer's limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Kit Contents A: Front drop coil B: Rear pinion angle drop block kit C: Front drop spindle D: Rear drop leaf spring E: A-arm F: Rear drop coil G: Rear drop shackle and hanger kit H: Rear drop flip kit only J: "C" section kit K: Bump stops L: Carrier-bearing bracket Applications:1981-1987 GMC C/K Pickup C10 Pickup 1" Thick Rotor Standard Cab V8,1981-1987 Chevrolet C/K Pickup C10 Pickup 1" Thick Rotor Standard Cab V8 Belltech Front Spindles FRONT SPINDLES Save 20%! Lower front of 2WD pickup 2" Improve handling while maintaining factory-ride quality and steering geometry Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers award-winning dropped spindles as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Spindles maintain critical suspension geometry, eliminating excessive ball joint, shock and tire wear common to other lowering methods. Ultra-strong ductile iron. Sold in pairs. Spindles will not fit all-wheel-drive vehicles. (A) '88-89 C1500 Pickup Standard Cab requires alignment kit 47ZX4046U. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1992-1998 Chevrolet C/K Pickup C1500 Standard Cab (exc. SS454),1992-1998 GMC C/K Pickup C1500 Standard Cab (exc. SS454),1988-1998 Chevrolet C/K Pickup C1500 Extended Cab,1988-1998 GMC C/K Pickup C1500 Extended Cab Body Lift Kits BODY LIFT KITS FOR 2WD AND 4WD TRUCKS Raise your truck a full 2" or 3" Designed and tested to withstand the toughest off-road punishment Give your truck that "off-road look" and ability Provide the extra clearance you need for travel over rough, rocky terrain? allow use of big tires or wheels without fender well modifications. Large graphite and glass-impregnated nylon body blocks provide maximum support with minimum weight increase. All necessary blocks, bolts, spacers, adapters and instructions included. Front Bumper Raising Kit available for '88-94 Chevy/GMC standard and extended cab 1/2- and 3/4-ton pickups, and '92-94 Tahoe, Yukon and Suburban. Eliminates the gap between the body and the top of the bumper when a body lift kit is installed. Includes all the hardware necessary to raise the bumper. 2" or 3" kit available. NOTE: Installation requires 2 people and approx. 1/2 day. Product SKU numbers ending in "F" are shipped separately from the factory. (A) Front bumper brackets included. (B) Front and rear bumper brackets included. (C) Require front bumper raising kit (not shown) sold separately below. Applications:1995-1999 Chevrolet Tahoe (exc. Diesel or Denali),1995-1999 GMC Suburban (exc. Diesel or Denali),1995-1999 GMC Yukon (exc. Diesel or Denali),1995-1999 Chevrolet Suburban (exc. Diesel or Denali) 2" Add-A-Leaf Kit 2" ADD-A-LEAF KIT Recommended for use with a snow plow Adds overall 1-1/2" to 2" lift?exact lift will vary, depending on engine size and accessories. Kit includes 2 leaf springs for front or rear and center bolts. (Can also use lift kit on rear.) Add-a-leafs not intended for use with other devices to lift vehicles. Note: Longer shocks recommended, but not required. Applications:1986-1996 Jeep Wrangler 3" Lift Kit for 2WD Pickup 3" LIFT KIT For American 2WD pickups Adds a 4WD look to your 2WD! Gives your pickup a more aggressive stance Designed and manufactured by Explorer to ensure proper handling and extended service life. Provides room for larger tires and wheels. Improves vision in traffic or off-road. Adds more ground clearance?a must on trails or fields. Designed and manufactured to ensure proper handling and extended service life. Kit includes 3" lift heavy-duty front spindles and front and rear ES1000 performance shock absorbers. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes rear add-a-leaf springs. (B) Includes rear lift blocks and U-bolts. Applications: All Makes All Models Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-1999 Dodge Durango 4WD Active Suspension Kit ACTIVE SUSPENSION KIT Dramatically improves stability?adds up to one ton of load capacity! Minimizes wear on tires, shocks and leaf springs 2 variable-rate coils designed to automatically aid rear leaf springs come into operation when needed?the more strain on leaf spring, the more Roadmaster aids suspension. Stops sway and reduces body roll on corners. Lifting force is applied to the side, countering the downward force during body roll. Helps keep truck closer to level in a turns. Easy bolt-on installation. Note: Do not exceed gross vehicle rating of truck. Cannot be used on vehicles with factory overload springs. Applications:1997-1999 Ford F-Series Pickup F150 4WD Air Lift EasyStreet Big-Port 1/2" NPT Bags BIG-PORT 1/2" NPT BAG Save 20% ! Designed for unrestricted airflow All-aluminum end plates Bellows include top and bottom roll plates Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models Air Management Systems FULL AIR CONVERSION SPORT SUSPENSION SYSTEM KITS Save 20%! Maintains integrity of hydro-formed frame Easy bolt-on design?no welding and minimal cutting Extended-length panhard rod keeps rear axle centered at all times From an industry leader, these systems are engineered to provide the maximum amount of lowering while retaining the integrity of the suspension. You'll have a sensational slammed look for show yet still be able to raise your truck to a safe, comfortable ride height for driving. Rear air springs are mounted outside frame for maximum lowering. Front kit includes air springs, brackets, shocks, shock-relocation brackets, hardware, air line and fittings. Rear kit includes air springs, upper and lower brackets, control arms, panhard rod, hardware, air lines and fittings. Compressors sold separately. Manufacturer's limited one-year warranty. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models Belltech Complete Lowering Kits COMPLETE LOWERING KITS For Chevy/GMC, Dodge and Ford trucks and SUVs Everything you need in one handy package to lower your truck the right way Only the finest quality components?specifically designed for a great fit and long life Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Coil Spring Kit Contents: A=Front coils, rear hanger/shackle kit, front and rear shocks B=Front coils, rear hanger/shackle kit, front and rear shocks, driveline alignment kit C=Front coils, rear blocks, U-bolts, front and rear shocks D=Front and rear coil springs, shocks and rear-limiting straps E=Front coil springs, rear air back bracket, front and rear shocks, rear-limiting straps Applications:1982-2000 Chevrolet S10 Pickup Standard Cab inc. Extreme,1982-2000 GMC S-15 Pickup Standard Cab inc. Extreme Complete Suspension Lift Kits COMPLETE SUSPENSION LIFT KITS Great off-road look 2-1/2, 3" and 5" lifts available For '94-98 Dodge Ram pickups Improve suspension performance while making room for larger tires and wheels. Premium steel and precision forging/die-cutting/forming designed by SuperLift++-+-+ top engineers ensure uniform parts for a hassle-free fit! Include 4 Superide shocks with yellow boots. Hardware kit for Cummins diesels sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994.5-1998 Dodge Pickup - Full Size Ram 2500; 3500 with Top-mount Overload Rear Springs Daystar Front Lift Kit FRONT LIFT/LEVELING KIT Maintains stock ride quality while giving your truck a balanced look! Eliminates droop or "dive" of factory suspension Here's the easy way to level the front of your truck! Long-lasting Dura-Thane? coil spring spacers mount above coil springs. Kit raises right and left sides. Applications:1983-1996 Ford Ranger 2WD (inc. Top-grade Extension Bolts) Fabtech Complete 2WD Lift Kits COMPLETE 2WD LIFT KIT Lift your truck up to 4" for the look and feel of a 4WD vehicle Complete kit includes front coil springs; upper control arms; rear lift blocks and U-bolts or add-a-leaf springs; adjustable front shocks; performance rear shocks; hardware; instructions. Shocks come with a limited lifetime warranty. Shocks feature hydraulic foam cell construction; chrome-plated 9/16" diameter hardened rod; polyurethane bushings; massive 1-3/8" diameter piston; high-flow 9-stage valving. Front shocks also have 3-way adjustability for "customized" settings. Bolt-on installation. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes ball joints with the control arms. Applications:1999-2000 Chevrolet C/K Pickup with 6-lug Wheels and Extended Cab,1999-2000 GMC C/K Pickup with 6-lug Wheels and Extended Cab Ground Force Complete Lowering Kits COMPLETE LOWERING KIT Save 20% on Selected Items! One easy-to-afford kit lets you hit the ground running with a sleeker look and hotter handling! Top-quality, fully ISO 9000 certified system includes everything you need to lower your truck Every component is precision matched to achieve that customized effect When lowering your truck, you can take chances or you can get Ground Force++-+-+ and know the components you receive will be the finest available. Casting, shock absorbers, coil springs and leaf springs are manufactured within fully ISO 9000 certified quality systems. C-section frame inserts are made of the same metals used in the original factory truck frame to ensure compatibility. The specially-tuned high-pressure nitrogen-gas-charged shocks are designed for top performance and positive suspension control. Front coils retain a factory-like ride. Ductile iron blocks and U-bolts lower rear and correct driveline angle. All steel components are powder coated for corrosion resistance and show-truck appearance. Manufacturer's limited lifetime warranty. C=coils; B-blocks and U-bolts; S=spindles; SH=shackles and hangers. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1982-2000 Chevrolet S10 Pickup V6 & 4-cyl.; Front Drop: 2" C; Rear Drop: 3"B,1983-2000 GMC Jimmy - Full Size V6 & 4-cyl.; Front Drop: 2" C; Rear Drop: 3"B,1983-2000 Chevrolet Blazer - Full Size V6 & 4-cyl.; Front Drop: 2" C; Rear Drop: 3"B Explorer Pro Comp 2WD 3" Lift Kits 2WD 3" LIFT SPINDLE SUSPENSION SYSTEM KIT Dramatically improves your ride and handling...on the highway and off-road Kit includes spindles, 1.5" add-a-leaf and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2000 Ford Explorer Pro Comp 2WD Lift Kit for Ford 2WD LIFT SUSPENSION SYSTEM KIT FOR FORD Now is the time to dramatically improve the ride and handling on your truck! Kit includes coils, box kit, rear block kit, Pitman arm, 4 ES 3000 shocks and brake lines (lines not required on 4" kit). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1982-1989 Ford F-Series Pickup F150 Extended Pro-Comp 6" Pro-Ride Lift System 2WD 6" LIFT PRO RIDE SUSPENSION SYSTEM KIT For a great off-road look, improved suspension performance and to make room for larger tires and wheels Kit includes upper A-arms, spindles, coils, brake lines, 1.5" add-a-leaf, 2.5" rear block kit and 4 ES 3000 shocks. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1988-1998 Chevrolet C/K Pickup C1500 3-dr. Extended Cab,1988-1998 GMC C/K Pickup C1500 3-dr. Extended Cab Rough Country 4" Lift Kit COMPLETE 4" LIFT KIT Built to withstand conditions that cause stock suspensions to fail Make sure your truck's ready for the trail or off-road driving?raise its height for increased ground clearance and better protection Kit also allows room for larger tires and wheels Includes 4 Hydro 8000 shock absorbers with black boots. Radial-tuned shocks feature velocity-sensitive valving plus urethane bushings to stand up to rough terrain or heavy hauling. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1980-1996 Ford F-Series Pickup F150 Rough Country Lift Block Kits REAR AXLE LIFT BLOCK KIT Raises the rear of your truck allowing additional clearance for bigger tires/wheels or during off-road excursions For use when leaf springs are mounted above axle Strong cast-iron blocks raise truck's chassis and body Kit includes 2 blocks, 4 ultra-strong C1541 steel U-bolts and hardware. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1980-1982 Ford Bronco - Full Size 4WD,1983-1990 Ford Bronco - Full Size 4WD,1991-1996 Ford Bronco - Full Size 4WD,1980-1999 Ford F-Series Pickup Rough Country Suspension Lift Kit SUSPENSION LIFT KITS Allow more wheel travel and space for larger tires Raise vehicle's height up to 4" for increased ground clearance, better protection and control off-road as well as more comfort on the highway Stand up to conditions that cause stock suspensions to fail. Include everything needed to complete the lift, except shocks. Major heavy-duty components in each kit vary by application. Complete new and improved suspension package with Heckethorn shocks and steering stabilizers (all sold separately), designed to enhance the performance characteristics of these Rough Country++-+-+ suspension kits. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1974-1989 Jeep Cherokee 4WD,1974-1989 Jeep Wagoneer 4WD Rough Country Suspension Lift Kits With Shocks SUSPENSION LIFT KITS WITH SHOCKS Raise pickup for increased ground clearance on larger tires For '70-98 American 4WD pickups All heavy-duty components made by Rough Country++-+-+ (acknowledged manufacturer of the best suspensions) to survive years of hard usage. Include radial-tuned velocity-sensitive valving and huge capacity and oversized construction, Hydro 8000 shocks stand up to all terrain and driving demands without sacrificing ride quality. Urethane bushings extend shock life. Kits include 4 shocks with black dust boots. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1988-1998 Chevrolet C/K Pickup 1-1/2" lift; 1/2-ton 4WD,1988-1998 GMC C/K Pickup 1-1/2" lift; 1/2-ton 4WD,1988-1998 GMC C/K Pickup 1/2-ton 4WD Stage 2 Suspension 4" Lift Kit STAGE 2 SUSPENSION 4" LIFT KIT Lifts front 4, rear 2-1/2" Front leaf spring, front shock kit and shock boots sold separately For Ford full-size pickups Complete system lets you install up to 35" x 12.5" x 16.5" tires on 16.5" x 9.75" wheels without impairing factory ride or payload capacity. Engineered and built to handle the punishment the Super Duty was meant to take. All items shipped in separate cartons from factory. Cannot be shipped express. NOTE: To achieve the lift desired, you must order one lift kit and 2 front springs (sold separately). Applications:1999 Ford F-Series Pickup Super-duty (Built 4/1/99-on) Superlift Suspension Lift Kits SUSPENSION LIFT KIT Improves suspension performance, provides a great off-road look and makes room for larger tires and wheels Available with or without 4 Superide shocks with yellow boots For '73-97 Chevy/GMC pickups Premium steel and precision forging, die-cutting and forming ensure uniform parts for a hassle-free fit! '73-87 kits have Superide front springs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1973-1987 Chevrolet C/K Pickup K20; K2500; 2-1/2" Lift; without Shocks,1973-1991 Chevrolet Suburban 3/4-ton 4wd.; 2-1/2" Lift; without Shocks,1973-1987 GMC C/K Pickup K20; K2500; 2-1/2" Lift; without Shocks,1973-1991 GMC Suburban 3/4-ton 4wd.; 2-1/2" Lift; without Shocks Suspension Lift Kit SUSPENSION LIFT KIT For 4WD Toyota pickups and Landcruisers Provides extra lift along with great handling! Adds needed clearance for bigger wheels and tires and safe off-roading without sacrificing riding comfort and control Precision built kit includes everything needed to complete the lift and perform year after year. Kit includes 4 Explorer shocks (except Tacoma, which retains use of factory front shocks). Pickup kit has necessary brackets and hardware to lift truck while maintaining factory steering geometry and ride quality. Landcruiser kit has 4 leaf springs and hardware. Shock boots sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. For '86-95 Toyota pickups: Stage 2 kit includes performance lateral compression struts and spindle spacers. Applications: All Makes All Models Tuff Country Extended Radius Arms EXTENDED RADIUS ARMS 15" longer than factory specs to improve ground clearance Is your Ford lifted up to 6"? These arms are 15" longer than factory specs to improve ground clearance, allowing a sharper turning radius and improved articulation. Rear mounting brackets use a pivoting axis for better off-road performance. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1980-1996 Ford F-Series Pickup F150 Pickup; 2" to 4" lift,1980-1996 Ford Bronco - Full Size 2" to 4" lift Tuff Country Leveling Kits 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Super-duty F250 & F350 with Gas Engine Tuff Country Suspension Lift Kits SUSPENSION LIFT KIT Get that rugged off-road look?lifts your truck up to 6" Gives added tire clearance for larger tires plus sure-footed performance Handles rough off-road conditions while maintaining a comfortable ride Performance kits include extended radius arms. Shocks sold separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1981-1996 Ford F-Series Pickup F150,1981-1996 Ford Bronco - Full Size Western Chassis Suspension Drop Kits SUSPENSION DROP KIT Every component is quality manufactured for safety and durability to ensure top performance The best way to drop your 2WD truck! Innovative Smooth Rider coil springs (where applicable) are specifically engineered for each individual application. Drop spindles (where applicable) are CNC machined of high-strength ductile iron. Kit with rear blocks have pinion angle correction to ensure less strain on driveline. Easy installation. Manufacturer's limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Kit Contents A: Front drop coil B: Rear pinion angle drop block kit C: Front drop spindle D: Rear drop leaf spring E: A-arm F: Rear drop coil G: Rear drop shackle and hanger kit H: Rear drop flip kit only J: "C" section kit K: Bump stops L: Carrier-bearing bracket Applications:1982-2001 GMC S-15 Pickup Standard Cab V6,1982-2001 Chevrolet S10 Pickup Standard Cab V6 Belltech Front Coil Springs FRONT COIL SPRINGS Save 20% On Selected Items! Lower 2WD pickups 1" to 3" Work with or without dropped front spindles Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers chromium alloy steel coil springs as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Springs are wound, shot peened and powder coated to exact specifications to ensure proper ride height, ride quality and long life. Sold in pairs. Springs will not fit all-wheel-drive vehicles. (A) '97-01 Ford F150 and F250: Alignment kit 47ZX4062A recommended for 3" front, 4" rear drop. (B) '89-97 Ford Ranger: Alignment kit 47ZX4063R recommended. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2001 Chevrolet C/K Pickup C1500 Standard Cab; Short Bed,1999-2001 GMC C/K Pickup C1500 Standard Cab; Short Bed Belltech Rear Leaf Springs REAR LEAF SPRING Made of precision alloy steel, oil tempered and heat treated for uniform strength and spring action Correct lean and rear-end sag, improve traction and reduce sway Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers a rear leaf spring as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Install in pairs to distribute weight equally for a more level ride. Springs will not fit all-wheel-drive vehicles. Applications:1995-1997 Chevrolet S10 Blazer,1995-1997 GMC S-15 Jimmy Belltech Rear Lowering Block Kit REAR LOWERING BLOCK KIT Made of high-quality extruded aluminum Lower the rear of your truck in either 1, 2" or 3" increments Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers this kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit includes 1/2" diameter cold-rolled U-bolts, SAE-plated washers and self-locking Nyloc? nuts. Lowering kit will not fit all-wheel-drive vehicles. Applications:1982-2001 Chevrolet S10 Pickup Standard Cab (exc. '96-01 V6),1982-2001 GMC S-15 Pickup Standard Cab (exc. '96-01 V6),1982-2001 GMC Sonoma Standard Cab (exc. '96-01 V6),1983-1997 Chevrolet S10 Blazer,1983-1997 GMC S-15 Jimmy Belltech Rear Shackle/Hanger Kits REAR HANGER AND SHACKLE KIT Save 20% on Selected Items! Lowers rear of truck 4" while maintaining original ride quality Durable powder-coat finish Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1987-1996 Ford F-Series Pickup F150 Extended Cab (exc. diesel) Belltech Rear Flip Kit REAR FLIP KIT Save 20% on Selected Items! Relocate the rear axle on top of the rear leaf spring pack for lowest drop possible! Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA award for best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Includes contoured, heavy-duty C-sections, heliarc-welded saddles, spring plates and shock extension with tough powder-coat finish, 5/8" U-bolts, top-grade hardware and instructions. For the ultimate drop, use with front spindles and springs (both sold separately). Flip kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6, you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1989-1997 Ford Ranger Extended Cab Tuff Country Alignment Brackets ALIGNMENT BRACKETS Trouble aligning your lifted truck? These brackets are the perfect solution! Restore your 1.5" to 2.5" lifted truck to the proper geometry by dropping the passenger's and driver's side axles Camber-adjustment bolts to ensure precise alignment included Sold in pairs. Applications:1983-1997 Ford Ranger,1991-1994 Ford Explorer Superlift 4" Lift Kit 4" LIFT KIT Retains factory ride quality, and steering geometry and CV axle angles Includes new rear springs Especially for 4WDs! New nodular iron spindles incorporate a raised ball joint boss to eliminate need to replace upper control arm. Front anti-sway bar links are extra long to maintain factory bar geometry. Full-width differential/control arm cross members for lateral rigidity. With front and rear Superide shocks with yellow boots. Front drive shaft (SKU# 48ZX8522RF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:2001 Ford Explorer Sport Trac 4WD Tuff Country 4" Suspension Lift Kit 4" SUSPENSION LIFT KIT Eliminates a sagging front end Combines spindle and one-piece sub-frame to reduce number of brackets and dramatically cut installation time Allows use of 33" tires Kit includes all necessary parts to achieve the lift, excluding shocks. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1997-2001 Ford F-Series Pickup F150 4WD with 4.2L or 4.6L Tuff Country Suspension Lift Kit SUSPENSION LIFT KIT Essential when you want to raise your truck, but don't want to sacrifice riding comfort Includes front EZ-Ride leaf springs with urethane bushings, front U-bolts, front spring eye bolts, rear blocks with U-bolts and brake line relocating brackets Recommended fro small-block engines only 6" lift kit also includes front sway bar drop bracket and transfer case drop kit. Shocks not included. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1969-1972 Chevrolet C/K Pickup 1/2 & 3/4-ton 4WD,1969-1972 GMC C/K Pickup 1/2 & 3/4-ton 4WD Superlift 4"/3" Lift Kit 4"/3" LIFT KIT Retains factory ride quality, steering geometry and CV axle angles Increases wheel travel Kit includes: new nodular iron spindles (better than ball joint spacers); full-width differential/control arm cross members (for lateral rigidity); front and rear Superide shocks with yellow boots; 3" rear blocks. Front drive shaft (SKU# 48ZX7482XF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-1999 Ford Ranger 4WD Tuff Country Suspension Lift System SUSPENSION LIFT SYSTEM Lift your 4WD truck while maintaining a near-factory ride Shocks sold separately. Click on SKU# for addition product information and kit components. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2002 Dodge Pickup - Full Size Ram 2500; 3500 4WD (exc. Factory Off-road Package),1994-2002 Dodge Pickup - Full Size Ram 2500; 3500 4WD (exc. Factory Off-road Package) Superlift 6" Lift Kit 6" LIFT KIT Maintains factory ride quality and keeps steering and CV operating angles within factory limits Front suspension, steering and differential are all dropped 6"! Retains all factory steering linkage Center-link stabilizing link ensures more responsive steering and longer Pitman/idler arm life. Allows use of most 35" tires. Front lift can be raised from 6" to 7.5" by adjusting torsion bar. For easier steering, stabilizer is recommended for 3/4- and 1-ton trucks (sold separately; SKU# 48ZX7493UF). Kit includes front and rear shocks (2 shocks for each front wheel on 1/2 ton). Optional front drive shaft (sold separately; SKU# 48ZX7492WF) required for trucks with Autotrac front drive and recommended for 3/4- and 1-ton trucks with part-time transfer case operating over 25 MPH in four-wheel-drive. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2001 Chevrolet Silverado K2500 Pickup (exc. HD),1999-2001 GMC Sierra K2500 Pickup (exc. HD) Tuff Country IFS Lift Suspension System IFS LIFT SUSPENSION SYSTEM Installing an IFS lift system on a Chevy/GM truck has always been a really tough job?until now! System uses a combination of new spindles and a one-piece sub-frame to reduce the number of brackets required, simplifying installation procedures and drastically cutting installation time! Kit includes all components required for lift, excluding shocks Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Click on SKU# for additional product information. Applications:1999-2003 Chevrolet Silverado K1500 4WD Truspeed Custom-Fit Speed Sensor Calibrator TRUSPEED CUSTOM-FIT SPEED SENSOR CALIBRATOR Easily adjusts your speedometer/odometer after installing larger or smaller tires on your computer-controlled truck! Installs in-line with the sensor and recalibrates signal sent to the computer Corrects speed signal for engine, powertrain and ABS controls 2 settings for seasonal tire changes. Precise speed-signal calibration to within 1%. Easy to recalibrate for future tire and/or gear changes. Speedometer reading, ABS functions and transmission shift points are corrected for non-stock tire size. 4-wire installation. Applications:1992-2001 Chevrolet S10 Blazer,1991-2001 Chevrolet S10 Pickup,1992-1994 Chevrolet Blazer - Full Size,1992-2001 Chevrolet C/K Pickup 1500-3500,1992-2001 Chevrolet Suburban,1992-2001 GMC S-15 Jimmy,1995-2001 Chevrolet Tahoe,1992-2001 GMC S-15 Pickup,1992-2001 GMC C/K Pickup 1500-3500,1992-2001 GMC Suburban,1992-2001 GMC Yukon Tuff Country Leveling Kits Promo 4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Engine Type: Diesel Engine; Sub Model: Super-duty F250; F350; Wheel Drive: 4WD Tuff Country Leveling Kits Promo Gloves LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! Uses 1/4" steel upper coil spring spacer?factory ride is retained. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Dodge Pickup - Full Size Sub Model: Ram 1500; 2500; 3500; Wheel Drive: 4WD Automotive ATV Car Clearance Jeep Motorcycle RV Sport Compact Sport Truck SUV Truck Van

©2003 AutoJolt.com All rights reserved Truck Suspension Shocks & Steering Lift & Lowering Kits